Question about Sony Handycam CCD-TRV328 Camcorder

1 Answer

Some buttons don't function, and the ones that do perform a function that's assigned to a different button. example: the rewind button turns the handicam function off-on

Can't rewind, can't play....recording is fine, but can't rewind the tape...

Posted by bobby on

Ad

1 Answer

Jackmohr

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 6 Answers

Well it must be a bad camerra.

Posted on May 17, 2012

Ad

5 Related Answers

sonyspares

sivaram vasudevan

  • 89 Answers

SOURCE: LCD screen will not respond to touch

First of all examine the LCD connecting flexible strip. If faulty or broken, let me know. Sivaram.V [email protected]

Posted on Jan 09, 2007

Ad
Arpi

Arpad Kothai

  • 326 Answers

SOURCE: Handycam CCD-TRV68 control panel/tape door acting like it died.

In order to solve this problem please order the control switch block (control pad) pn: 147642411. If you need more info please advice.

Posted on Mar 28, 2007

Anonymous

  • 38 Answers

SOURCE: Sony Handycam CCD-TRV37 8mm Analog... 2 Problems, maybe more unknown at this time:

This does require disassembly to remedy the problem. There are various possible fixes. The most prevelant I have seen is cold solder connections of the board connector for the fpc cable from the top operation switch block ass'y. All you need is someone who can handle this task, like a professional. The controls that you are experiencing problems with are all linked with one cable and connector. One bad solder joint can cause serveral operation faults. Good Luck, magic seadog

Posted on Aug 19, 2007

Anonymous

  • 71 Answers

SOURCE: Won`t Rewind

Do you still have the remote control? Try with the remote. If this works, the button of the camera is broken and have to be replace by a qualified technician. Good luck!

Posted on Nov 24, 2008

welcomejee

Shahid Electronics

  • 10594 Answers

SOURCE: SONY DCR-HC40 CAMCORDER

flexible wire connecting between LCD board and camera main board is cracked or broken and requires replacement.
Let me know to provide you part number of flexible wire if you want to replace it yourself.

Posted on Feb 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic RR-930 does not backspace with or without pedal. It engages the mechanism but appears stuck when tape is inserted. Runs fine without tape in deck.


The ancient tape is junk. Buy a new one. You might also try slamming the old tape against a wall or desk to loosen up the tape layers. Then FF and RW all the way.

Apr 20, 2015 | Panasonic RR-930 Desktop Cassette...

1 Answer

I taped a TV show. But I can't fast forward to see the end part that I want to watch. It just advances to the end.


I'm not surprised that it advances on the end. The VCR doesn't know where the end of the taped programme is. You will have to search manually for it. Start at the end of the tape and rewind a few minutes worth of recording then press 'play' and see what you get. If not successful rewind further and try again, etc,etc. Alternatively you could press "play +rewind" which should allow you to watch the record on what is fast (=x2) rewind. It will help you if you know how long the show was and at what point the tape was when recording started.

Mar 26, 2015 | Televison & Video

1 Answer

What is the reason the tape won't play on sa-ak95


It may be the tape(s) themselves. Pre-recorded cassette tapes are usually no problem for most players, but many user-recorded tapes were of the C90 or C120 variety. These cassettes use much thinner tape in order to get the recording time. This can cause the tape, after many starts and stops and partial fast-forwards and rewinds to get tight on the reels. This will cause the tape sensor to think that the tape is at the end of the reel when it is not. Sometimes rewinding from end-to-end will help, but not always,

Nov 07, 2014 | Microwave Ovens

1 Answer

Toshiba dvr670ku - vhs tape won't play, shuts recorder off


look to see if tape will fully load and if FF or REWIND work, if not a transport problem, drive mechanism not moving the tape, unit will sense this and shut unit off----even a problem in the loading mechanism for the VHS tape not loading the tape all the way will do the same thing.

Oct 14, 2012 | Toshiba M754 VCR

1 Answer

Sony m-2020 tape will not move in record or play mode


here's the manual of this recorder. You can take a look at it to see if there are any explanations regarding the error:
http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000033419.pdf

Oct 04, 2012 | Sony M2020 / M-2020 Microcassette Dictator...

1 Answer

Suddenly my Sony M-2000 Microcassette Transcriber will not PLAY. The tape will Rewind and Fast Forward fine, but when you push PLAY, it just beeps and won't move. Any ideas?


Just talked to Exec. Communication Systems. He said that the play motor is not turning (the rewind and fast forward uses a separate motor) and the problem is either the belt or the motor. They can repair them at $82.00 plus parts and shipping.

May 18, 2009 | Sony M-2020 Desktop Cassette Transcriber /...

2 Answers

Erasing recorded tapes


While holding the 'Erase' button down, press the 'Rewind' or "Fast Forward' button. It will erase the tape while it rewinds or fast forwards.

Apr 20, 2009 | Philips Desktop 720-T Desktop Cassette...

1 Answer

Tape completely rewinds when I let off the foot pedal


Make sure the button for back space is not at max is the second button from the right side if problem don’t get fix unplug the pedal from unit and try to play and stop if unit work Ok the problem is your pedal. Needs to be replaced.

Apr 02, 2009 | Panasonic RR-930 Desktop Cassette...

2 Answers

VCR tape playback not good


Check your "tracking" If the tape played fine in the old machine, then tracking is the answer, provided that the new machine records good.

Jun 27, 2008 | Philips Magnavox MWR20V6 DVD Recorder/VCR

2 Answers

All of a sudden some of my tapes will not playback and others will??


I have been experiencing the same problem with my Panasonic PV-GS120. I don't know the root cause or real solution, but I found if I keep playing the tape, rewind->play->rewind->play, eventually I would get the image back normal. I think I would try to clean up header with a header cleaner to see if it helps or not. If not, I plan to submit a request to Panasonic support to check out possible solution. Good luck.

Oct 22, 2006 | Panasonic Palmcorder PV-GS120 Mini DV...

Not finding what you are looking for?
Sony Handycam CCD-TRV328 Camcorder Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Cameras Experts

Larry Stiles
Larry Stiles

Level 2 Expert

301 Answers

Al Rush

Level 2 Expert

270 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sony Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...