Philips MCD716 can you help me please I bought a philips MCD 716 for my son he has a lot of region 1 discs is there a code to make this machine multi region thank you

There's a lot of useful information on the videohelp.com website.
Philips DVP5996K region code
posted by satish_z2002.

• Please turn off all power using remote
• Turn On Power
• Eject Tray - Player will display NO DISC
• Enter Setup and navigate to preferences page
• Type 138931 on your remote
• Player will display Default Region Code
• Use up down arrow keys and select 0(Zero) for All Regions
• Hit Enter

It's now region free.

DVD Player and Blu ray Player region codes

here u go rate me Fix ya

1/press setup
2/go to the prefernces page.
3/type 9 6 5 3
4/select region
solved 100% by Fix_You

Please follow the below procedure to set the regional settings of your choice on your Philips DVD player:

Step 1: Turn on your DVD player (without disk)
Step 2: Press "Setup" from the remote
Step 3: Go to the "Preferences"
Step 4: Enter "138931" and the current zone will displayed
Step 5: Use the Up and Down arrows to change area (0 = multi-zone)
Step 6: Press "¨Play" on the remote.

Or you can use Leawo Blu-ray Copy to make the Blu-ray/DVD disc to region-free, so that you can play it with any Blu-ray player or computer. It is one of the best Blu-ray copy software to copy and back up Blu-ray/DVD/ISO files to hard drive or blank Blu-ray/DVD disc. This Blu-ray Copy software could help preserve your Blu-ray/DVD discs and keep them away from damages. It could copy and back up Blu-ray/DVD disc to computer in folder and/or as an ISO file, or back up Blu-ray/DVD disc to blank discs in 1:1 rate.

Source: https://ccm.net/faq/3767-how-remove-regional-lock-on-a-philips-dvd-player

Unlock code for Philips HTS3541
1. Press Home
2. Press on R/C 8 6 8 9 3 1 0 (the 0 being multi-region)

Using the remote controller:
Press [SETUP]
Select Preference page
Press [1] [3] [8] [9] [3] [1]
Select region code using [UP] / [DOWN] buttons.

With your set on and without disc in the tray:

1. Press PLAY from your remote control
2. Press the following button sequence: 1590 2379 390
3. Press PLAY again

This will release the region verification in your home theater (region free). However, some DVDs (multiregion in particular) will not play, since they require region detection from the player unit.

I've done this to my 3090 and been using it like this for 3 years.

HI Ian,
Have also just purchased a Philips HTS8140 with Philips LCD screen.
Found a result on web as follows:
1.Turn on TV
2.Turn on Sound Bar System.
3.Press eject.
4.Press 9 9 9 0 (0 being Region Free or place the desired region #)
(a message displaying "region 0",or the region you chose, will appear on the screen.)
5.Switch soundbar off to soundby.
6.Turn player back on and it should be either region free or the region you selected.

So far I have not been able to check with anyother disc exept region 4.

Hope this is of help for you!
Xtopher

Australian players are designed only to play Region 4 discs. United States discs are Region 1. It is illegal to change the Region code on a DVD player, so I can't tell you how to do it (ironically, it is the most frequently asked question about dvd players on Fixya.com - global world), but there are videos on YouTube that will show you how to do it - I would just enter "philips region code dvd" as your seacrh term. You won't find that exact model, but one of the codes in the video should work. Note that you will only be able to change the region code three times on a Philips - after that you will be locked out. So change it to Region 1 once, and never change it again.

-Tha Mp3 Doctor

I need a region unlock code for my Philips Micro Theatre MCD290 DVD

1. Turn on player.
2. Open disc tray.
3. Press setup button on remote.
4. Press right button three times to highlight "preference page"
5. Type 9 6 5 3
6. Press up or down button to change the region code ("0" for all regions)
7. Press setup again to exit