OK CHECK THE HIGH VOLTAGE REGION, FLYBACK AND TRIPLICATOR UNITS. CHECK OPEN RESISTOR IN CRT FOR ALL TUBES AND ISOLATION HIGH VOLTAGE CABLES IN EACH TUBES.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I need to know the quality of the speakers on the TV. Try unplugging it from the speakers on the TV and plug it into the souround sound speakers only and see if it plays differently. Double check your sourround sound and makes sure you did not reverse a wire.
Hello,
To get sound out of your surround speakers, first off go through the receiver setup and make sure that is correct. Also, usually the best soundfields to use for sourround sound is PLII Movie or dolby digital. Next , make sure the source you are viewing is capable of outputting 5.1 sourround sound. Lastly, it is a good thing to remember that sourround speakers are only intended to reproduce sound effects. You certainly can override it so that all speakers play full range audio, but that is not the intention.
Good Luck
you will have to connect an audio output from the tv to the sourround reciver. you should have some audio output on the back of the tv and a corresponding input on the samsung ht c555
I am trying to connect the sound box to the TV (Flatscreen ) so that I can have sourround sound, but on the box it has inputs and this is also displays on the TV inputs... ? So where are the outputs so that the sound can come through the speakers???? puzzled!
Can you remove connection between the receiver and TV and then try ? If it still turns hums and turns off, then try disconnecting all the speakers and power it on. If it still turns off, then you have a bad receiver...Let me know..
read your manual well and double check all your connections,make sure the remote is working, check the battery contacts in it too. If you haven't got a manual, obtain one.
use the lcd digital oticla cable ouit or coxal whatevr it ha sto sterio digital in for full sround sound ok not all chs come in suround but sterio in digital mode will make it
×