I have an f11 error code on my he3 kenmore washer. Does anyone know what this is?
The "F" variables (F4-F16) are for electrical problems. You should select Pause/Cancel twice then select Drain/Spin if there is excessive water in the washer. Re-select cycle and press start. According to the manual, if the problem remains, call for service.
Posted on Dec 31, 2006
Jan 30, 2016 | Dryers
Jan 27, 2016 | Washing Machines
Dec 06, 2015 | Kenmore HE2 Plus Front Load Washer
Feb 14, 2014 | Frigidaire Kenmore Washer Tub to Pump Hose...
Dec 25, 2010 | Kenmore 3.8 cu. ft. HE3 Front Load Washer
Mar 02, 2010 | Kenmore 3.8 cu. ft. HE3 Front Load Washer
Mar 10, 2009 | Kenmore 3.8 cu. ft. HE3 Front Load Washer
Jul 04, 2008 | Kenmore 3.8 cu. ft. HE3 Front Load Washer
Jun 01, 2008 | Kenmore 3.8 cu. ft. HE3t Front Load Washer
586 people viewed this question
Usually answered in minutes!
I've had the same problem and I did do the Pause/Cancel several times. In essense, eventually the machine will just fail to work.
Error code cell
my Kenmore he3 washer diagnostic check stops at step two with a F11 error so what is wrong?
no lights on panel, washer won't come on
×