- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
On many of these Bluetooth devices you must hold the power button or another button on the unit for like 10-20 seconds to get it into "doiscovery" mode. Then use your phone to try and FIND in in the settings-> bluetooth...
1. First, make sure that the bluetooth is on on the other phone. 2. Make sure also that it is discoverable by other devices. 3. Sometimes windows mobile has this option to allow beam, check that also. 4. Did this answer your question?
Make sure that it's charged. Go thru the instruction on how to program your BT for your phone and make sure that your phone is set to pickup BT. the default passcode for your BT to set to your phone is 0000 or 1234.
IF THIS HELPS PLEASE VOTE.....GOOD LUCK AND THANKS..
Pardon me if you have already tried this but with my em236c I had to hold the Answer/End button for about 15 sec before it flashed red/blue. The manual doesn't say how long to hold it. It took a couple of tries for me. Hope this helps.
if the chocking coil that is placed bet charging fuse and charging input pin of UEM(universal energy management) is not working properly the set wont charge or else if protection anode is short circuited also device wont charge
×