I have a Frigidaire washing machine FWSC235RFS2 that leaks water when in any rinse cycle.

Bobby G

• 212 Answers
• Posted on Sep 13, 2007

SOURCE: Miele washing machine model W713 front load - issues

If it is leaking from the waste pump area it may be blocked by a small piece of clothing like a sock or something similar! This will also cause it to take too long to complete a cycle. Remove the rubber hose onto the waste pump and check inside the hose and the pump, make sure the pump spins freely and that nothing is stuck in the hose pipes leading to the pump

SOURCE: Water leaking under washing machine

check your water pump , and tub seal.

SOURCE: Kenmore HE2 Washing Machine Leaking

Have you looked behind the bellow under the folds to make sure there's no rips or tears? The bellow could appear okay on the outside, but still could have a tear somewhere out of plain view. I had this happen to me before.

The inner seal from the bellow to the tub could also be loose now. If you said a garment got stuck and the washer continued through the cycle, this could have loosen the seal where it attaches to the wash tub. You would need to tighten the band clamp around the facing of the tub if this is the case.

A good way in determining where the leak may be coming from is to remove the lower panel under the door. Start a wash cycle and watch to see where the water is coming out.

Now...if the tub seal is loose it may require some disassembly to get to. If you're going to go the route of disassembling the washer front, and have never replaced the bellow before, it probably wouldn't hurt to replace it anyway. My rationale: It's better to disassemble the washer once, rather than possibly having to do it all over again in the near future.

You can get a replacement bellow at searspartsdirect.com. Just type in your model number and look under the "Door and Latch Parts" section for item number 1 (part #8540952). It only costs about $32.

If you need instructions on how to replace the bellow, just go to my profile and look under my "Tips and Tricks". There is a write I posted there giving step-by-step instructions. If you cannot find it, or have any further questions, please post back and let me know. I hope this helps answer some of your questions.

SOURCE: Water leaks during rinse cycle

My Washing machine is leaking in gearbox.the quality of water is bad (Hard)

SOURCE: Washing Machine is not draining in rinse cycle to go to spin cycl

you both seem to have bad lid switches. A bad lid switch will prevent draining and spinning.