ADP 7966
I had the same problem. Indicator flashing. F7 displayed. Nothing seems to work.
The following worked for me:
Remove the filter on the floor of the machine, including the metal grill.
Press & hold the start button (like you do when you want to cancel a programme). this will drain the water out of your clogged up drain outlet. Clean your filter and grill and replace it.
My guess is that the sensor in the drain (a little glass tube) measures whether the water going out is clean enough to decide that your dishes are now rinsed correctly. If your filter's clogged, the water going down the drain is still dirty. After a while it gets sick of trying and stops the machine.
F7 in whirlpoolese may mean "Clean my filter now or you can wash your own bloody dishes"
Dishwasher model ADP 5550
Start button flashes continually, but will not work on any program except to start draining each time the button is pushed and held down for a couple of seconds as was suggested on this fixya page. I have turned the dial to other programs and pushed the start button but it just continues to flash. This dishwasher is not 2 years old and has had very little use,
Please help. Thankyou.
start button keeps flasshing what should we do?
Flashing start button. Not functioning on any cycle. Always displays rinse cycle and sounds like it might be pumping out. Does this for about two minutes before stopping. Filters appear clean.
My dishwasher is 4 months old the start button keeps flashing sometimes it will wash sometimes it wont have checked the salt the rinse aid the washer arms no joy does'nt do the full cycle and before when it had finished i could open the door and the dishes wud be hot now its only cold water washing the dishes please help
×