Fan error says wait then fan err

temperature ntc failing will need replacement.

This should help, good info includes links! http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/76555-error-code-f30.html

Hello tseitlenok - Typically ERR indicates that the washer has detected an error. Try reprogramming the unit by unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes and restart unit. If error code does not clear, I would personally recommend consulting a certified technician for an accurate diagnosis and to assist with the repairs.

This error is a PU Board Fan motor error.

Check if the fan is properly connected, if necessary replace the fan.

Should fix the problem.

look up error message? is there something besides "err" displayed? err FF= freezer fan.. what does your owners manual say? or the web site?

Pull all the batteries, wait 30 seconds, put in a completely different card, put batteries back in and turn on and format the card--sometimes works

If you get an "Err" or "Error" message, you will need to step off of the scale, wait a few seconds and then step back onto the scale.

This worked for me, from a Sony Tech.
1) When SYS ERR is displayed turn off the player by holding down the power button until tghe unit turns off. 2) Unplug the power cord. 3) Wait a minute or so and plug the player back in. This reset the player for me.

Try a cd player laser cleaning disk. If you still have errors, restart the radio. Remove the radio fuse in the fuse block wait five minutes the reinstall. Let me know how it goes.