Pes 2009 stopped loading

This can be a problem if the Wii drive.

Your Nintendo Wii may need to be replaced as I assume the Nintendo warranty has run out.

However, please try this first:
Unplug all the plugs from the back of the Wii and wait at least 10 minutes and then plug them all back in again and try loading a game again.

And again and again and drives you up the wall.OK-boot sector is corrupted, or hard drive is going south.What you can try is system restore.On boot see which button is designated for that-usually f10 or f12.Start tapping that button and follow instructions. If that failed, the only option is to reinstall OS.If you have a lot of stuff that you want to save, install Windows in different folder, say WindowsA.All your stuff will be saved on the Hard drive-My Documents.Good luck and keep us posted.

The hard disk is defective and must be replaced. Only then you should reinstall, using the backup disks that you must have created before that. If you don't have the restore disk you must order it from them, and unfortunately pay for it.

What, exactly, does this enquiry have to do with cameras, please ?

If the computer is restarting continously at the windows loading screen then you have a windows issue of which your computer is "Blue Screening" and restarting. In this case you arent really seeing the blue screen as windows restarts immediately as the error occurs. My advice to you is to press F8 before the windows loading screen and choose to "not restart automatically on error" that is not entirely what it says but its to that regard. If that doesnt work try pressing the "Pause Break button continously until the blue screen appears, read the error and google it to find out what is causing the error and go from there. Please feel free to get back to me on this if my information doesnt help or i need to explain further.

i believe that if you update the firmware for the copier, you shoud see that the garbage printing should go away.

when upower up thecomputer enter in bios setup press del or F2 or F1 to neter in bios setup when u power up.
thenr eset bios defaults settings.
then check your hardiskk is deteted or not.
if sata is enabled then disable then press F10 to save settings.

More than likely you have a hard drive failing/failure.

You should have it looked at if you are not "comfortable" doing it yourself.

Same problem here!! Zacitty, if you got a solution already! Please get back at me!! Just respond to this thread!! Thanx!!

Though this isn't a solution to the HTML 404 error directly, you can go back to www.garmin.com and click on myGarmin and login to your account. There is a link to "recent downloads" that you can access to attempt the download.

I was able to successfully download the 2009 map upgrade this way.