My i-mate PDA2k shows serial v2.06 and does not work

SOURCE: CONNECTING TO THE INTERNET ON MY COMPUTER THROUGH MY I-MATE PDA2K

atta, you are asking a different question, not the same problem. YOU want to use bluetooth to transfer files. The other guy wants to use his phone as a dun.
so, for the other guy.
On this particular phone, only bluetooth dial up networking will work. It will not work as a cable connection. You have to pair the phone with the computer, then set up a connection under dial up networking as a bluetooth modem. The phone number will depend on the network. As I don't know your operating system, I don't know which dun to set up or how to set up your specific bluetooth pairing.
good luck.

Posted on Aug 09, 2008

mcdblaster

• 35 Answers

SOURCE: i-mate PDA2k

To be sure if its not the battery thats bad, connect it to the charger and charge for a while. Monitor the light indicator at the top right of the phone.It should start from red to green after its fully charged. then try to restart it by turning on the power button also at the top right of the phone.
If after these procedures the phone does not start up or it shows some temporal 3 seconds flash of power, you may need to get another battery. If a new battery does not start your phone,then its a power fault.It needs to be rapaired.

Posted on Sep 26, 2009

mcdblaster

• 35 Answers

SOURCE: my I-mate touch Sacreen is not working

Reset your phone! and if you dont mind loosing your information run a complete reset.Then do a screen re-allignment.
To avoid a future re occurence avoid placing your phone in your tight jeans pocket so that you don't apply pressure to the screen.

Posted on Sep 26, 2009

mcdblaster

• 35 Answers

SOURCE: CONNECTING TO THE INTERNET ON MY COMPUTER THROUGH MY I-MATE PDA2K

The i-mate pda2k is not a 3g phone! its only a 2g phone. But you can connect to the internet by using your wireless lan and GPRS.To connect to your computer, go to your phone settings menu then select "connect phone as modem",this will give you the option of connecting through GPRS or otherwise. You must have your settings set up properly to use this feature.

Posted on Sep 26, 2009

mcdblaster

• 35 Answers

SOURCE: How do I setup my i-mate PDA2k wireless LAN?

The wireless LAN feature on your phone works by default.If you are in a wireless enabled environment,just go to your phone seetings and select connections,then select the wireless LAN manager which you must turn on; check the box and click o.k.The phone automatically detects all available networks in that place.You can now connect via a password or free as the case may be. This should be o.k.At the base left of the wireless LAN screen is the tools TAB click on this to show you the network card configuration menu.Here you can view all the available networks and decide on some other vsettings as you please.Remember that if your wireless internet requires a password you may not be able to browse till you enter the correct password.

Posted on Jan 09, 2010