Kenwood Here2Everywhere SIRIUS Radio Receiver with Car Kit Logo

Related Topics:

Question about Kenwood Here2Everywhere SIRIUS Radio Receiver with Car Kit

Open Question

Satellite receiver not working in car

I've never had a problem with this since i bought it a year ago. suddely, no signal is going from the satellite receiver to the car radio. the display on the receiver is fine. the only thing i did differently from the past year is that i brought it into work last nite and listened through the mixer board in my edit bay. help!!! victoria

Posted by Victoria Wise on

Ad

5 Related Answers

niefieboy

  • 20 Answers

SOURCE: faceplate not working

is any sound coming out to the speakers

Posted on Jul 12, 2008


Anonymous

  • 1 Answer

SOURCE: Kenwood KDC-MP832U display not working

I had this problem! It was the Cars Battery. Kenwoods unit's fade or go completely blank when there is little power to power the stereo. Try charging your battery or grabing a new one from a scrappy! I was all over the net looking for help but finally sorted it!

P.S. My younger brother had to do the exact thing and it worked for him as well!!!

Posted on Nov 15, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: lost code kenwood auto radio

Hello, I`ve lost the code nummber for my Kennwood Radio. Trying very hard to recive the code number but nobody can seem to help me.Any ideas ?

Posted on Dec 15, 2008

ldc0819

  • 1 Answer

SOURCE: My Kenwood Mod H2E Sirius Satellite Radio no longer gets a signal

Debi Mann from Temecula/Murrieta?

Posted on May 29, 2009

xxxxxx xxx

  • 5034 Answers

SOURCE: Radio needs to be reset, I have no code.

Unfortunately KENWOOD codes are not available for free from anywhere on the Internet.

Try your local Radio Decoding Service or Car Radio / Audio Store ...who will connect it to a laptop and read/recode the memory chip (EEPROM)

Posted on Sep 06, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3helpful
1answer

My Delphi Roady XT receiver will not maintain the signal. Does not work even I replaced the antenna. Works for a about 5 minutes before losing the signal

I had the same problem with my xt two years ago. I had two other roadys' at the time and they both worked with that antenna so I called xm customer service explained what was happening and they sent me a new receiver for $10. They told me that those units aren't worth trying to repair. Maybe you'll have the same luck I did. Give em a shout. Good luck.
0helpful
2answers

Drops signal as soon as location changes

You may have a dead zone in lake area !! I experianced alot of signal lose on a lake in oklahoma last year !!! swampratt200 !! AAEEE!!!
0helpful
1answer

No satellite signal pick up

Yes ! 3 years is at the end of the expected lifespan of the battery
1helpful
2answers

Sirius Receiver goes silent and displays Acquiring Signal.

I have a 3 year old Sportster 2 replay unit that worked perfect until 1 month ago. I posted my problem on this website a day before you did with this same problem. I googled to no end and even spoke to Sirius who wasn't willing to replace my unit at no charge since it was out of warranty. I found an unusual solution on the internet that worked for me. I place my receiver in the freezer for at least 20 minutes (this was recommended by a guy somewhere on the internet with the same problem). I have actually left it in freezer overnight too. This has solved my problem. It is the craziest thing but I thought I would try it before I resorted to replacing all my accessories and receiver since Sirius was less than cooperative with the issue. Anyway, hope this helps.
4helpful
1answer

Battery replacement now ca't find satellite Garmin c320

More than likely when you reinstalled the gps receiver (the board with the wires connected to it) at the top of the receiver you did not position it properly. If it is not positioned properly it will not receive a satellite signal
0helpful
1answer

Does Uniden sell Satellite Dishes? Several years ago people were able to purchase Satellite Dishes from Radio Shack. This enabled them to get non scrambled television stations from around the world. Does...

What you are referring to is a FTA receiver. These are generally considered to be illegal and people who install them are then charged 4500.00 by direct tv because of the assumption that their signal is being stolen. Uniden no longer sells them for this reason
0helpful
2answers

Not getting signal

is there no auto tune option in your set?
0helpful
4answers

Delphi Roady XT won't turn on

Same here, it's nice to know I'm not the only one with this issue at least; but as to a way of solving this, I've found nothing.
0helpful
2answers

Astar 27" TFT LCD TV, Model LTV-2701

go to www.vancebaldwin.com and enter your model number and purchase a factory replacement
Not finding what you are looking for?

Open Questions:

0answers

Denon AVR-X2400H Intermittent Protection Mode on startup Apologies for the incoming wall of text. Whenever my Denon AVR-X2400H receiver has been off for several hours most regularly in the morning, it will often go into protection mode on start. This has been happening for months. After anywhere from a minute to 20 minutes, after many restarts/moving the unit around/swearing, it will start normally and function without issue for hours until the next long period of being off. It is the dreaded PRT: DC. During this period of protection mode, it will fail to start even if I disconnect everything but power. I have swapped the power cables, tried different outlets, and let it get plenty of airflow though if it were temp related it would be a different code / not happen on first startup. I even opened up the unit, disassembled it and looked for moisture/scorch marks/loose cables before re-assembling. I have performed a couple factory resets over the last couple months. I assume the intermittent startup nature hints at a failing but not failed part, but am not sure what to replace. I have access to an engineer friend / multimeter if helpful. It is well out of warranty, but there's a part of me that wants to believe it can be salvaged, especially given current AVR prices. Other things I have tried include leaving it in ECO/network standby. There was a period where spinning the source wheel on startup would cause the AVR to lock up but not trigger protection, after which unplugging/replugging would allow it to start normally. Not exactly scientific.

See all Kenwood Here2Everywhere SIRIUS Radio Receiver with Questions

48 views

Ask a Question

Usually answered in minutes!

Top Kenwood Audio Players & Recorders Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22509 Answers

David Shaub

Level 3 Expert

2994 Answers

Morne Olivier
Morne Olivier

Level 2 Expert

265 Answers

Are you a Kenwood Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...