My Sony Big screen,57in.,Model #KP57WS510,the age-Feb.2004. I turned it on,it looks like i need a pair of 3-D glasses to watch it.Red and green outline the people or objects.Not so much in the middle,mainly on the left side of the screen,Can you help me with what i need to fix it? can i do it myself or do i need a repair man? Thank you, L.Sargent

JVC LT-46AM73 LCD TV Won't Turn On - YouTube

? 3:28
https://www.youtube.com/watch?v=y5j3RGUe4gM
Feb 25, 2015 - Uploaded by Awesome Things
JVC LT-46AM73 LCD TV won't turn on after power outage. ...LCD & LED TV Repair - No Image & Blank Black ScreenFlashlight Test - How to ...

JVC wont turn on - JVC - Streaming Video & TVs

www.tomsguide.com/answers/id-1677424/jvc-wont-turn.html

May 15, 2013 - JVC lcd tv will act like its turning on then the green light after 2 seconds ... wont turn on Forum; SolvedAcer Laptop V4DA2, screen won't turn on.

My Jvc Av-32F476 Tv Won't Power On, The Green On Timer Light Stays ...

www.diyforums.net/my-jvc-av-32f476-tv-wont-power-on-the-green-on-...

Dec 8, 2013 - My jvc av-32F476 tv won't power on, the green on timer light stays on and m. ... On the remote control, look for the buttons PICTURE MODE and DISPLAY, with ... My Jvc Lt24dd52j Won't Turn On The Blue Light Is Flashing But ...
Nov 1, 2014
I Have A JVC LT-42TG30J, Randomly The Tv Has Decided It ...
Aug 29, 2012
I Have No Picture On My 47 Inch On My Jvc Big Screen Just A ...
May 23, 2012
My Dynex 42" Wont Turn On Power Led Is Lit Up But It Won't C ...
May 24, 2011
More results from www.diyforums.net

http://www.retrevo.com/support/Sony-KP-57WS510-TVs-manual/id/268ag712/t/2/

Projection sets have two very common problems listed below. You can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

The first common problem is convergence

These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

You can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.
This is a very common failure on these projection sets and a fairly simple DIY fix. All projection sets including Samsung, RCA, Sony, Philip Magnavox, Panasonic, Pioneer, Akai, GE, JVC, Toshiba, and others at some point will have the same problem.
You can get a repair kit with parts and instructions from www.TvRepairKits.com

Does the red light blink? If so how many times? If the tv has never been worked on most likely the lamp is bad.That will cause shut off it would normally blink 3 x if so.Check the lamp and see what condition it is in.thx

Two possible reasons here:

1) Does it look the same when you play a DVD etc or is it just with the sat receiver? If the same either way signal is not the problem.

2) On the set, turn the color all the way off and go if you can find one to a channel that is in black and white---What color is the screen? It should be something like a black and white picture.

The model indicated has a long history of problems with the three picture tubes.

If the picture is not black and white etc there is a manual way (not with the remote) to try to adjust for this---depending on your answer to the above I can tell you exactly how to do this---takes about 10 minutes and a Philips screwdriver---you do not have to be a tech to do it.

If I have told you something you did not know, rate this solution as very helpful as I do this here for free.

SD TECH

What you describe is probably a color convergence collapse, usually caused by a power amplifier failure, refer to the following link: http://www.youtube.com/watch?v=esk4nYZKFcg if this video is close to what you see on your TV you will need to replace both power convergence IC, the model KP57WS510(model given in your post) calls for STK392-510 both are available through UED, email [email protected], the above link gives an idea on what is needed for the IC replacement, that is if you're thinking of repairing the problem yourself.

remove front bottom panel and turn RED screen drive down it will be on your Focus/screen drve control block 3 controls on top for focus R/G/B and 3 below for screen drive to tubes R/G/B

The following convergence repair kit also applies to your model sony The kit contains the two convergence ICs all six pico fuses and four of the 4.7 ohm resistors. It also comes with free installation instructions and free tech support so you can do the repair yourself.
http://servicemanuals.vstore.ca/product_info.php/pName/sony-kp46wt510-convergence-repair-kit/cName/convergence-repair-kits/osCsid/e28ca8f8240833facd92d8890ef7e2b2