Laptop Clock loses time

What make, model is it?

The control board module will more than likely need to be replaced to fix the problem, I recommend a pro to assess. But if you can live with this it would be a better economic choice and you could use a portable clock for critical timing.

Without the model number (off the id tag) there is no way to look up a part number for you. Also is there some consistant symptom like loses 10 minutes every hour, or something along those lines?

To set the clock go to the link below page 9 will tell you how to set clock.


http://resources.jvc.com/Resources/00/00/97/MB002ien.pdf


On the remote control ONLY:

1 Press CLOCK/TIMER.

The hour digits start flashing on the display.

2 Press UP or DOWN to adjust

the hour, then press CLOCK/

TIMER.

The minute digits start flashing.

• When you press and hold UP or

DOWN, the hour digit changes

continuously.

3 Press UP or DOWN to adjust the

minute, then press CLOCK/TIMER.

The built-in clock starts.

• When you unplug the power cord or if a power failure occurs

The clock is reset to "AM 12:00" right away. If this happens, set

the clock again.

• The clock may gain or lose 1 to 2 minutes per month
If this happens, reset the clock.

I probably need more details but, it sound like when you remove the battery to recharge it, the clock loses any power it had. Most people have a second battery. When the first battery begins to lose power, they insert the fully charged battery so the clock is only without power for a few seconds. Try that.

Hi- Press and hold clock button until clock flashes. Set the time up or down. We already lost an hour and have to wait till fall to get it back,- don't lose any more time on this! Let me know if this helps- Thanks- Ed

Check your fuses, you may have one blown that controls the constant voltage to the units which rewuire memory, and therefore need 12v all the time.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

I had this problem too but i solved it by installing a professional version of the same operating sisitem