At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Hi when i press the buttons 5,8,0 the screen go upside down then after sometime it comes back to normal i tried restoring factory settings but still the same
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
ok try following steps:reboot your phone when they getting reboot press = green button(answer key) + 3 star key(*) but befor that make sure that your phone data will be lost above procudere may restore factory settings of your phone
Hi Karen, i guess that the problem is hardware problem not software..i don't know exactly what's the problem, if you tried installing new software for your phone and that doesn't fix it, that mean its hardware problem.
what is the imei number of the phone if you do not know you can take the battery out of the phone it is located to the back of the phone or you can press #06#
LCD change on 7373. This will take you to the connector.
Switch off the phone.
Take SIM card out.
Take front faceplate off by inserting Credit card/Tweezers between housing and silver key. As you pull up, take credit card and slide it on the side of the phone prying the clips off. (Gently tease it out working around the phone)
Unscrew these 6 screws at the edges with the T6 screwdriver and release the 4 clips surrounding the LCD screen. Slip the little black frame off of the LCD screen, and lift the screen. (Prize it up gently from the swivel end of the mob.) There’s a printed circuit board underneath it is attached to the LCD by a hook type catch. Don’t damage it (the board). You should now see a screw. Removing this screw removes the back cover.
That’s it! Put your new faceplate or housing in and figure out how to put things back by following the directions here in reverse order.
You should use anti static gloves for this job, avoid touching the connections and the LCD face.
there is a chance of display being spoilt and dry soilder near the display connector. and if the mmc is not able to access then u need to replace the mmc reader IC
×