Hobart A200 Commercial Mixer

It is a Start Capacitor. It give the motor a jolt to get it running.

HOBART, Fits Hobart Brand, For A120/A200, Capacitor ...

Grainger https://www.grainger.com > product > HOBART-Capa...
HOBART Capacitor, Motor Start: Fits Hobart Brand, For A120/A200 ; Item: 235F28 ; Mfr. Model: 00-070487-00025 ; Catalog Page: N/A.
US$41.13

MOTOR STARTING CAPACITOR FOR HOBAR MIXER ...

eBay https://www.ebay.ca > ... > Commercial Mixers
MOTOR STARTING CAPACITOR FOR HOBAR MIXER MODEL A200 REPLACES 7048700018 ; Condition. New ; Quantity. 67 sold. 82 available ; Item Number. 254321066847 ; Brand.
Rating: 5 · ‎ 1 vote

Motor Starting Capacitor Fitting Hobart Mixers A120, A200 ...

National Band Saw Parts https://nbsparts.com > All Products
MOTOR STARTING CAPACITOR FOR HOBAR MIXER MODEL A200 REPLACES 00-070487-00018. 125V, 50/60HZ, 145-174uF. Includes: One Capacitor. Replaces#: 00-070487-00018 ...
US$30.00 · ‎ In stock
https://www.google.com/search?q=Hobart+A200+the+capacitor+is+starting+or+running+capacitor

..

08/03/2007 model number

The Hobart A-200 is an 80's product. These first came on the market around 1985. There is no way to date the one you have without examining it.

The best estimate is 25-30 years old.

Hello, Go here for beaters for your mixer: Hobart Mixer Parts Hobart Mixer A200

Go to this site it is the parts list for the A200 and the A200T

http://hobart.co.kr/manual_pdf//013.pdf


Then go here for parts and parts number confirmation
http://www.food-equipment.com/parts_Hobart_mixers.htm


Hope this helps if so let us know.

it's a standard drive system found on most hobart mixers like the a200 style and you may find only hobart parts will fit it

I'm a hobart tech---what is the ml number on the data plate?

Hi Don. If your mixer is hurling honey, you must be very popular in the ant world...Sorry!

The Hobart electric motor on your mixer was designed and engineered to operate on 115-120 volt current and is the most dependable, and capable commercial mixer out there Is it possible for you to use a commercial Imerssion Blender for the first part of your mixing operation. Once your honey thickens a bit perhaps the a200 wouldn't hurl honey. Another consideration would be to either try a different beater or modify the one you have by removing surface area from the beater. If you remove metal, be sure to do it in a balanced fashion to avoid unwanted vibration in the beater. If you're not up to removing metal, take it to a machine shop and they'll do it for you. It probably won't take long, or cost much, and they have the expertise and the equipment to do it properly. If you found this solution helpful, please rate it. Good luck! ricardok45.

Cindy,if it has a screw take it out,grab a flathead screwdriver and work your way around the cap.Some mixers have been painted or just the gunk over the years make the cap hard to pull off.The push button i have never seen on a hobart mixer near the hub.Give me the serial and spec number.