Denon ud-m30 Can anyone help me? my cd player doe's not work,once you insert the cd, it seems to spin around then just stop! no sound no nothing. could this be the laser? if so is it worth having done, or should i buy anew system?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hello! how u . this behavior is brought about by this factors i either the loading motor belt has worn out , 2,the loading motor is faulty not spinning ,3the CD tray is set wrongly so remove the tray and set it correctly for it to close and open .
Try looking into the lens (power off) with a magnifying glass. If you see any damage you will need to replace the lazer/lens section as the lens will never be able to read the disc.
If it's clear it's more likely to be an electronic fault.
1. press the menu/set button on component to select display mode 2. use the +/- button to set the time mode (AM 12:00 blinks) 3. press the menu/set button for at least 2 seconds (the hour will start blinking) 4. Use the +/- button to set the hour, must roll the hour to change am/pm 5. press the menu/set button to switch to minutes 6. use the +/- button to set minutes 7. press the menu/set button to finish setting the time
We had the same problem, found that if you plug your device into "line 2 in" on the back and select tape it worked for our ipod. We had to turn the volume right up on the ipod to hear it though
The sled motor sounds like it's malfunctioning and not stopping winding at the beginning or end of the disc. There should be a detector switch to stop this. Might just need a good clean.
×