How do i connect my insignia dvd player to my comcast system?

I'm sorry to tell you this, but the BDLive01 was not designed to connect to Netflix.

Netflix streaming was not possible on the Insignia BluRay players until the NS-BRDVD3.

Again, I am sorry to be the bearer of bad news.

Use output of combo player to input of TV. Use what ever available input you have left on you TV. HDMI or Component input is best, but others will work.

I have the same question. Any solution? I lost my remote to this dvd/vcr player.

The jacks on the DVR are only outputs. You can not connect a DVD player to the DVR, it would have to be connected to the TV directly.

Your power adapter for the car is not working. Check if there is any voltage output while plugged in.

have you check the polarities?or fuse?

wheres the dvd hooked up

The Insignia is-tv040919 is a Cytron and the code is 11326. But no Comcast multifunction remote contains that code -- so you cannot enter it manually and the 991 search function will not find it. I discovered the make and code by the serendipity of having a cable box with a multifunction remote and several DTAs with the small, black two function remotes. I first installed the Insignia on a DTA and the remote programmed quickly. I just moved that tv to the room with the cable box with the multifunction remote and mayhem ensued. I got an $8 RCA 3 function remote today and it's working great on the Comcast cable box, a DVD player and, drum roll please, our old friend the is-tv040919.

Refer to my other solution on your same subject question

Use the A/V outs to the composite cable and connect to your Westinghouse A/V jacks.

On the Insignia player, press the Source button until you see A/V OUT on the insignia players screen.

Set your Westinghouse to the A/V input port you have connected the Insignia player to and VIOLA...you should have picture and sound.