Hi,
I've read that you chenged the developer on your Sharp AR-5316.
How did you do that?
I've no idea on how to start...., can you give me some hint?
Thanks,
Andrea
You take the drum out, then unscrew the developer (it should be a greenish screw), it should slide out, empty the developer out, take bag of new developer shake it up real good... then pour evenly into developer unit, while turning the mag roller... reinstall..
This machine, the Developer is apart of the Toner Cartridge... (I apologize; I didn’t realize this model toner came with the developer attached)
This is a link to the Operator manual, look at the Maintenance section. It gives instructions how to change and reset the maintenance counters..
http://www.sharpusa.com/files/cop_man_AR...
( If this link doesn’t work, go to http://www.sharpusa.com and search in the Business copiers section)
×
290 views
Usually answered in minutes!
Dear,
thanks for the your reply.
While waiting for an answer I was looking around for the answer and I found 3 post where people say that in this printer I don't need to change the developer since it is included in the drum (someone says in the toner) unit and so when I change the drum I change the developer too...
http://www.fixya.com/support/t337439-sha...
http://www.fixya.com/support/t345862-sha...
http://www.fixya.com/support/t325327-add...
...I'm confused!
I changed the drum a month ago and I didn't reset any counter.
Should I just reset the counter? (Which? How???)
Thanks,
Andrea
Thanks a lot!!!!
get into SIM mode by pressing "#" key then "interrupt" key then "C" key then "interrupt" key again. enter 42 then press start - enter 01 then press start.
×