My washer is very loud as it spins in spin cycle. The load is even and is loud when it is empty as well. If there is a heavy load in it will not spin at all. that sounds like a belt issue but it might be a bearing or pulley problem. Thanks
It will be your bearings not the belt or pulle you can check this out by having it empty open the door place the palm of your hand on the outside were the top of the door closers to place your fingers ti the inside of the top of inner drum and pull your fingers towards your palm if there is the slightist movement than the bearings need replacing
Posted on Aug 22, 2007
215 views
Usually answered in minutes!
sounds like a helicopter taking off during the last spin cycle
Sounds like a bearing gone bad
very loud sound during the spin cycle
spins effectively, but there is a loud noise that does not sound like a bearing rumble, but almost a plastic whining sound
Front load door. Loud sound before spin.
The washer is level but is out of balance with every load, even a load with 4 lightweight shirts.
Washer spins and rinses but is loud. Sounds like it's going to die
×