JVC GR-D290 Mini DV Digital Camcorder Logo

Question about JVC GR-D290 Mini DV Digital Camcorder

1 Answer

Frustrated I have not used this cam alot and know that I need it I am getting a 03 error cam is in safeguard mode please eject tape and reinsert tape. How can I fix this???? Please It just started at my sons bb game when I put another brand new tape in it.

Posted by Matt Weatherford on

  • Anonymous Nov 25, 2007

    my camcorder says reinsert tape

×

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 156 Answers

E03            TU & SUP REEL FG

 

 

In the case no REEL FG is produced for 4 seconds

or more in the capstan rotation mode after

loading was complete, the mechanism mode

is shifted to STOP with the pinch roller set off.

This error is defined as [E03].

However, no REEL EMG is detected in the

SLOW/STILL mode.

 

 

1. The idler gear does not engage with the reel disk well.

2. Though the idler gear and reel disk are engaged with

each other, the tape is not wound because of overload

to the mechanism.

3. No FG pulse is output from the reel sensor.

4. No power is supplied to the reel sensor.

5. Tape transport operation takes place with a cassette

having no tape inside.

6. The tape slackens and no pulse is produced until the

slack is taken up and the tape comes into the norma

Posted on Oct 27, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
2answers

MY CAMERA SHOW E03 ;unit in safeguard mode ;EJECT AND REINSERT TAPE WHT SHOULD I DO............

JVCGR-D270.Digital Camcorder. When we put the tape in the cam it chews the tape whiles loading and says that it's in 03 safe guard mode. Please help.
0helpful
1answer

It is writing: unit in safeguard more eject and reinsert tape. However after reinserting tape it does not correct. Please help.

Safeguard mode follows a numeric code, go further down and you will see. In case "02" you need a service personel (something to be done/parts need to change with the mechanism)
0helpful
1answer

Gr-dvl-520u trying to record or playback tape it goes into safeguard mode within 5 seconds. alternatly pressing play and still every 3 seconds advanced the playback without it going into safeguard mod

According to http://www.techlore.com/article/10974/JVC-Camcorder-Stuck-in-Safe-Mode/,

"JVC notes that you are also given a malfunction code when the unit is placed into safeguard. If it displays code 01, 02, or 06 you should remove
the battery and powersupply and wait for a while. Code 03 and 04 indicate that you should eject and reinsert the tape.

If neither of these solutions work, your only alternative is to bring it to a shop or send it to JVC for diagnosis or repair. Unfortunately, there is no other way to clear the condition."

If you are getting E03 or E04 errors on every tape you try, it sounds like a servicing is required.
1helpful
1answer

I am recieving error E04 "safeguard mode"

An excerpt from http://www.techlore.com/article/10974/JVC-Camcorder-Stuck-in-Safe-Mode/:

"JVC notes that you are also given a malfunction code when the unit is placed into safeguard. If it displays code 01, 02, or 06 you should remove
the battery and powersupply and wait for a while. Code 03 and 04 indicate that you should eject and reinsert the tape.

If neither of these solutions work, your only alternative is to bring it to a shop or send it to JVC for diagnosis or repair. Unfortunately, there is no other way to clear the condition."

According to this, E04 denotes a problem with the recording media or the mechanical bits that deal with the tape. Hopefully trying another tape helps.
0helpful
1answer

Unit stuck in safeguard mode

I can't find e setup for sony
camcorder
10helpful
3answers
6helpful
4answers
4helpful
1answer

Unit in sageguard mode

"safeguard mode" indicates a hard failure, normally associated with the mechanism. Try ejecting the tape if one is in the unit. Do not force the mechanism open as it will cost more have the cam repaired. If tape is defective and can be removed, try using a cleaning tape first, then a known good tape.
2helpful
4answers

Unit in safeguard mode

You mix te info with Write protected tapes.
Safe guard mode is caused by the motor that takes the tape out of it's case, through the mechanics and past the video head.
If for some reason the electronics detect that it's been done by too much force, the safe guard issue promts.
Not finding what you are looking for?

348 views

Ask a Question

Usually answered in minutes!

Top JVC Video Cameras Experts

Ekse

Level 3 Expert

13435 Answers

Steven Wander
Steven Wander

Level 3 Expert

597 Answers

Marco Avila
Marco Avila

Level 2 Expert

57 Answers

Are you a JVC Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...