Question about Durabrand DWT1905 TV

12 Answers

Durabrand model BH2004D

I'm trying to hook up a dvd player to this tv and i'm not sure how to do it. I got the player connected to the tv, but what channel do I put it on, because I did not see any video key. I don't have the remote.

Posted by Christy Allison on

  • 6 more comments 
  • Anonymous Dec 25, 2007

    i am tryin to hook my xbox 360 but what channel do i choose .. coz i tried doing bunch of stuffs but seems to be not working...

  • Anonymous Dec 30, 2007

    Setting up a separate VCR and DVD player to a Durabrand 20 inch television. Have audio but no video on the DVD.

  • heidi lee May 21, 2008

    well i lost my remote and all the remotes i have bought will not work for it is there any whay that i can turn it to video without a remote?

  • elguillory Dec 22, 2008

    I, too, am trying to hook up my Xbox and can't get it to work.  It works on other TV's

  • Anonymous Apr 04, 2009

    is modelbh2004d tv a digital

  • Anonymous Apr 20, 2009

    Does the Sony Universal Control also work in the Durabran BH2004D???

  • turnesr190 May 03, 2009

    I have a Durabrand bh2004d and my remote stopped working. I got a Sony universal remote and it's codes don't work for my T.V. what do I do?

  • Nathan Smith
    Nathan Smith Mar 22, 2013

    0157 CODE worked well with my GE remote and my BH2004D tv

×

Ad

12 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I am not sure about Direct TV but dish network does not allow the hookup to go through their box...it must go through the TV only. Speaking with Duraband at 1-800-256-2487 confirms you have to have a Duraband remote and universals won't program to it. Ask for parts dept. and order a new remote. Sorry - not good news for me either!!!

Posted on Jan 11, 2008

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The Phillip Universal Remote works with the Durabrand BH2004D television, though it does not list it. Code 0317 I know works with this Durabrand TV.

Posted on Sep 03, 2008

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Smash the **** out of it n go buy a new 1 of a diffrent brand then throw a brick the the durabrand company with a note that says EAT ****!!!!

Posted on Sep 14, 2009

  • Anonymous Sep 14, 2009

    ORR u can take the tv and smash that threw their companys window with a note that says EAT SIHT!!!

×

Ronald Tisdale

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 156 Answers

The solution for the durabrand TV's is a GE or other type 3 digit universal remote programmed to code 189 Then you can change to the external video ports by pressing the Video/Source button.

This works for all durabrand TV's small to big and Combo's also.
I seem to be the only person with this information lol.

Posted on May 03, 2008

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

No prende el televisor bh2004d

Posted on Apr 03, 2011

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

A Philips Universal remote model CL032 will work every function on the Durabrand BH2004D tv. The codes the instructions give you for the remote won't work, you must go through the search proceedure which is real simple.
Simply follow the instructions for searching the remote code library.
You will have to push the channel + button 40 times. This will make since once you read the directions.

Posted on Sep 07, 2009

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I lost my ac adapter for my Duraband 1800 - I can't seem to find one. Does anyone know what is compatible?

Posted on Sep 25, 2008

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Just bought a Panasonic Universal Remote that has codes for Durabrand. Stuck in either 0323 or 0317 and walla the TV turned on and the buttons seem to work.

Posted on Aug 02, 2008

  • Anonymous Aug 02, 2008

    oops I meant a Philips Remote.

×

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have Durabrand tv model no bh2004d and i have ge remote control what code

Posted on Nov 04, 2007

Nathan Smith

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Channel 3 or 4 , And the GE remote works well with this BH2004D tv, Code 0157

Posted on Mar 22, 2013

Anonymous

You have to hook it up through Dishnetwork or directtv box. If you don't have the remote you can't put the tv in video mode. There are no codes to make universal remotes work these POS tvs. Sorry.

Posted on Feb 05, 2007

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There is no inputs on the direct tv reciver

Posted on Dec 27, 2007

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not hooking up a computer, just dvd recorder, no other hook up ports on tv, just cable jack, dvr will not come in on any ststion


Does the DVD player have an RF out if it does then put antenna cable on RF in connection port on DVD recorder and purchase another antenna cable to go between DVD RF out to TV antenna in.
Then manually tune a TV channel to the channel frequency that the DVD outputs on.

Aug 24, 2014 | Televison & Video

1 Answer

Dvd hookup


It sounds that you are connected the TV with DVD player Via AV cable. In this case, no RF channels won't go. You have to select its AV option. Check it. Refer the user manual for TV.

Aug 12, 2013 | RCA F19251GY 19" TV

1 Answer

Craig dvd player, model CVD327, won't play


no, s video is not required to work. if you hooked up 3 colors to the tv 3 colors. make sure it's on video 1 or aux channel. and as long the dvd player is on and that channel is on, if that does not work, try on another tv that has same connection. if that doesn't work, then we know that dvd player doesn't work.

Oct 17, 2009 | Televison & Video

1 Answer

Problem hooking up DVD player to TV thru my cable box


Chances are you've got your DVD player hooked to OUPUT jacks on the cable box, not inputs. I haven't yet seen a box that takes any kind of an input other than the cable line, but they will have RCA jacks for audio and video outputs on the back. So your cable channels are fine, but the DVD signal is hitting a dead end.

The only solution if your TV doesn't have RCA inputs for video and audio is to get an RF converter (around $10-$20). This takes the A/V signals from your DVD and turns them into a channel 3 or 4 signal that connects to your TV's antenna input.

The converter also has a connector on the back for the cable coming from the cable box, since you'll have to disconnect that from the TV. When the DVD player is off, the cable box signal gets passed to the TV as normal. Turn on the DVD player and the RF converter switches on; put your set on channel 3 or 4 and you'll see your video.

One final thing: The converter will need an AC outlet for its power adapter or power cord, so make sure you have a spare. If you don't already have your TV and DVD player connected to one, this would be a good time to pick up a surge-protector outlet strip. Then not only will you have enough outlets, you'll be protecting your equipment as well.

If this solution has given you what you need, please take a moment to rate it appropriately. And thanks for asking here!

Feb 01, 2009 | RCA DRC277 DVD Player

2 Answers

Technically challenged...need DVD to show on TV screen


hey 1st of all you gotta make sure that your son made tha right connections with the av cable (this is the cable with three different coloured pins) from your DVD to your tv. if this doesnt solve your problem then make sure you are using the correct av channel on your tv set that will allow you 2 play your DVD player because sometimes you cant play your DVD on thhe same av cannel you watch normal tv

Jan 01, 2009 | Pioneer DVR-520H DVD Recorder

1 Answer

Hooking up my DVD/VHS player to TV & Convertor box


I would just hook up the dvd/vhs player with the red,white,yellow rca cables that should of come with your unit and just go to the input on the tv to watch your dvd/vhs player. This will give you a better picture and sound while allowing you not to have to watch dvd/vhs on a channel which helps make the dvd/vhs player independent. Also if possible I would hook the converter box up with the red,white, yellow rca cables to the tv as well if your tv has more than one set of red,white,yellow plugs since it is a better connection that coax and you probably watch more tv than vhs/dvd anyway. So bottom line try to hook up both boxes red,white,yellow and watch each box on different inputs instead of like channel 3 or 4. Also to record of converter box you can run coax from converter box to dvd/vhs combo and make sure your dvd/vhs player is on tuner input or channel 3.

I’m happy to help further over the phone at https://www.6ya.com/expert/brandon_60dfebff379d64bd

Nov 16, 2008 | Insignia Digital-to-Analog Converter for...

3 Answers

Connect tv vcr and dvd player to digital converter box


Yes you can first connect the converter box to the antenna first. Next hook the tv out on converter box to vcr in on vcr. Next hook the vcr out to the tv in and watch vcr and converter box on channel 3 sometimes channel 4.on the actual tv and of course change channels with converter box remote. For dvd player hook it straight to tv with red,white,and yellow cables that come with your dvd player. Then to watch dvd player if it's hooked up that way you have to put your tv on a input like video 1 or input 1. This can be done by using the tv remote and looking for a button that says tv/video or input or source button. This is some common names for that button on tv remotes.

I’m happy to help further over the phone at https://www.6ya.com/expert/brandon_60dfebff379d64bd

Nov 02, 2008 | Insignia Digital-to-Analog Converter for...

3 Answers

Hooking up a magnavox MWD7006 DVD player to a APEX TV


honey and guest: connections: Red, white, and yellow composite from out of cable/sat box to in of this dvd, and then a 2nd red , white and yellow cable from out of this player to in on television. Every television calls the correct channel something different - make note of where you plug the r,y,w cables to TV -- it may be labelled video1, video 2, av1, av2, input1, ext 1, etc. Turn tv to correct input/av/source/video channel. Call 1-800-605-8610 for further assistance.

Jan 13, 2008 | Philips Magnavox MWD7006 DVD Player

1 Answer

Connecting to a DVD/VCR player/recorder


In the menu of the Philips dual unit,select set-up then look for channel auto-program instructions. Be sure to hook-up a tv channel signal source before beginning auto-search.Hope this helps.

Oct 03, 2007 | Mitsubishi CS-27205 TV

Not finding what you are looking for?
Durabrand DWT1905 TV Logo

5,735 people viewed this question

Ask a Question

Usually answered in minutes!

Top Durabrand Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Cindy Wells

Level 3 Expert

6220 Answers

Are you a Durabrand Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...