Question about Canon CFX-L4000 Plain Paper Laser Fax

1 Answer

Received in Memory

I have issues!! My alarm light is blinking, the screen is saying paper jam, but there is no paper in the machine, only in the tray. My incoming faxes are "Received in Memory", and I can't clear the alarm button, and I need to know how to retrieve the stored faxes from the memory. I inherited this fax from one of our closed stores, so I have no manual.

Posted by Cyndi Carter on

  • 3 more comments 
  • jjsunny Apr 04, 2008

    I have a KX FM 220 Panasonic fax machine. I have fax received, but for somwhat reason, it didn't print out instead received in the memory and I don't know how to retrieve the fax from the memory. please help!

  • Mickey14 Apr 21, 2008

    I continue to have a "paper jam" message. I don't know where to look for the sensor, etc. I appreciate any suggestions.

  • Anonymous May 22, 2008

    En un Fax Canon LFX-L4000, me arroja error 322, como puedo solucionar este problema

  • Anonymous Feb 18, 2009

    my Canon LaserBaseMF6580PL printer says: "received in memory", what that means??

  • Anonymous Mar 25, 2014

    Set up paper trays

×

Ad

1 Answer

RHanson

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 193 Answers

Check the paper sensor at the bottom of where the paper comes out! this has a tendency to pop out of its little holder. Use a flashlight to see it! the sensor is blocking the beam.

Posted on Mar 23, 2007

  • RHanson Apr 30, 2007

    check black sensors in the paper path..the spring holding teh sensor can become dislodged.

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Ready and alarm lights keep blinking. will not print

Service manual: ready and alarm blinking :
Paper Jam
Clear the paper jam and press the panel button if the printer
does not automatically resume printing.
Misfeed:
Re-install the paper and press the panel button.

Clear the jammed paper inside the printer. Press the panel button
if the printer does not automatically resume printing.

check the sensors:
1) Turn off the printer power switch, open the front cover, and remove the drum unit.
2) Turn on the printer while pressing the control panel button. The Drum LED comes ON.
3) Lightly press the panel button again.
Alarm LED is ON = Front registration sensor is turned ON.
4) Press and release the panel button again.
Drum LED is ON = Paper eject sensor is turned ON.

If sensors are On, paper is being detected, Off- no paper


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

0helpful
1answer

The alarm keeps flashing and the message says there is a paper jam. I cannot find a paper jam, but the fax cannot retrieve items in memory either.

Hi;
  1. Remove the cartridge look inside is there any paper rmove it carefully
  2. remove the paper from cassette
  3. load the paper again
0helpful
1answer

Paper dosnt feed in printer pixma mp210 photo. HELP

Either paper jammed, stuck by foreign object or DRIVE ASSY faulty.
0helpful
1answer

Incorrect paper size so fax was received in

That suggests a sensor is jammed or damaged... sorry I know no more.
0helpful
1answer

Paper jam

Open the paper tray and remove the first couple of sheets of paper - If the paper tray is fully loaded leave it half full.

1helpful
1answer

Alarm setting

The alarm sounds for only 5 seconds.When you receive a fax and the paper jams, the fax will be received into memory. When it has finished receiving the fax, the alarm will sound momentarily. When you remove the jammed paper, the fax will print automatically.
0helpful
1answer

Won't feed the paper

the problem with your machine maybe that the default paper size programmed into your machine. My guess is that it is set to legal size{ 81/2x14} Get your owners manual out and see how to program the paper size in the user settings sections.
1helpful
4answers

Received fax's are not printing. Unit prints confermations and is working as a printer but recieved fax's just park in memory and will not print.

TYPICALLY A FAX MACHINE WILL RECEIVE MESSAGE IN MEMORY WHEN NO PAPER OR TONER/INK FINISHED INDICATION IS THERE, REPLENISH THESE SUPPLIES WITH GENUINE ONES AND FAX WILL START PRINTING. IF PROBLEM IS NOT SOLVED , PLEASE TRY TO CLEAR THE SETTING FOR MEMORY RECEIVING, IF STILL NOT SOLVED TRY BRINGING THE MACHINBE TO FACTROY SET SETTING BY CLEARING THE MEMORY. HAPPY FAXING OMNIPRESENT
Not finding what you are looking for?
Canon CFX-L4000 Plain Paper Laser Fax Logo

825 views

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2366 Answers

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6307 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...