Ive read a few problems already posted up and I think my problem is probably the same as the others.
A few convergence points are way off and are not adjustable. All the problem points are in two areas at opposite corners. It seems to have happened all of a sudden rather than a gradual move.
If these are the ICs, how easy is it to replace them? Are these tine SM units or are they easy to take off and solder back. I have some electronis experience and do some PCB stuff at my work so I am not afraid to melt most things.
Oh boy if you only knew
this tv looks like the chassis made by hitachi
it has the standard stk392-110 ics in it
replace both of them and the associated low ohm flameproof resistors
just the ones that are burned or open
after that if the convergence can be lined up in the customer menu
get on your knees and thank the lord cuz theres only one thing worse
than a hitachi service convergence to the uninitiated
thats a hitachi service convergence using the phillips remote
gl
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The tv have a problems known a convergence picture problems,it is dead.Tv have any colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?Yes,than the tv convergence board it is dead.The tv convergence board must have it components parts replaced like 2 STK convergece ICS and some or all of resistors too.To fixed the tv convergence board to solved the tv convergence pictures problems.The tvs shops will cost u like $300-350 for parts and labors.
Replace the two convergence ICs and the 6.8 ohm resistors. The DPTV305 - DPTV345 convergence repair kit from www.tvrepairworld.com works for your model and contains the cd with instructions
Convergence is dead.Know how to solders?Must replaced 2 convergence ICS,and all it resistors.Buy a convergence kit at Tv repair World.com.Tvrepairkits.com to repair it ur self.The shop will cost $300 for parts and labors.
Ur convergence is dead.Know to solders? Require changing 2 convergence ICS,and all the resistors.Tries Website Tv repair World.com,Tvrepairkits.com.for the convergence kit.Shop will cost U $300 for parts,and labors.
The blue outline is a convergence problem. Depending on the brand of tv you have there are adjustments to fix that. If the adjustments wont work then the convergence circuit will have to be repaired.
Convergence amp ic bad http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html http://www.hdtvoice.com/voice/showthread.php?t=28929 Or send to ptscorp.com http://www.hdtvoice.com/voice/index.php?s= good luck
please mark the post with a fixya
×