FREE DOWNLOAD DRIVES ULI M92O5 TV BOX - ULi Electronics Inc. M9205 USB TV Box

Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Terrarium TV Alternatives https://terrariumfreeapk.com/terrarium-tv-apk-alternative

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

sir may ginagawa akong tv ang trouble nya. pag on mo ng tv after mga 2 to 3 .minutes nawawala na ang sound tpos pag pinatay mo at pag plug mayron uli sounds tpos nawawala uli sound buo ang i.c sanyo st 21ys2

Click here to download what you need.

Hello download the driver here at asus:

http://www.asus.com/Motherboards/Intel_Socket_775/P5RD1VM/#download

First select your operating system 32 or 64 bit next select
others and ULi Chipset Driver
Click on global for download
Unzip the file before installation.

Good luck

The chipset in your motherboard doesn't have in it a controller for the SATA, it uses an external one - ULI M1573. For it to be activated and the disk detected its driver must be already in the install disk. Unfortunately the XP install disk doesn't have any SATA drivers and the ULI driver isn't included in the original Vista disk . So you must add it on a floppy during install Here it is http://download.cnet.com/ULi-SATA-Controller-M1573/3000-18492_4-159398.html

SATA drives need 3rd party drivers similar to SCSI when installing WINDOWS press option F6 to install drivers

Hello,

Try this link.Please let me know if this helps or not.

Regards,

Joe
http://download.cnet.com/M9205-USB-TV-Box/3000-2116_4-87114.html

go to the board manufacturers website and find the support link and you should find the link to download the drivers and bios and users manuals as well.

1. put Motherboard Cd (come with p5rd1vm) in cd/dvd rom.
2. BIOS configur as boot from cdrom.
3. restart machin Motherboard CD boot with press enter
4. command line shows 4 option
5. Select 1st option for exact and proper copy ULi sata driver for winxp.
6. Insert floppy press enter
7.you see d copy procedure.
8.then this floopy insert when winxp setup asking F6 for additional driver.


Thank you.
YOGESH JADHAV