Casio Exilim EX-Z750 Digital Camera Logo

Related Topics:

Question about Casio Exilim EX-Z750 Digital Camera

1 Answer

Displays Table of Numbers on LCD before each picture

Every time I attempt to take a picture, a 2 column table of numbers with the headers 'Total' and 'Delta' appears on the LCD. I can hit any button and it'll go away, but the table re-appears every single time I want to take another picture. It doesn't prevent me from taking the pics, but it's hard to set up a picture with this stupid table always in the way. I've reset the camera, re-formatted all the memory, re-applied the 1.02 firmware. Don't know what else to do. Any ideas? The table looks something like this: TOTAL DELTA 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Thanks! David

Posted by David Dannert on


1 Answer

Misty Hoffman

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 374 Answers

That sounds like a service menu. Did you recently have your camera sent into repairs? Try resetting your camera and see if that goes away. In REC mode press menu go to setup tab go up until you see reset press right arrow & highlight reset press set. Hope that works for you.

Posted on Jul 14, 2007


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


Sum numbers in a column down until you come to a blank, then start again

Sounds like your issue can be solved readily with a pivot table.
If you give the columns of names a title like "NAME" and the number columns a name like "VALUE". All other columns should contain a unique name.

Then select the entire table, including the labels at the top ensuring that the range extends entirely over the column you need to sum the values of.

In Excel 2013, choose the INSERT menu and select the PIVOT TABLE command.
Insert the Pivot table into a new worksheet.
A new sheet will open with a strange-looking control panel on the right of the window.
Make sure that the box for NAME and VALUE (only) are checked

You will notice that Excel assumes that you want the SUM of the values for each NAME summed. The results are in the leftmost area of the worksheet.

If this works for you, please vote my answer as "helpful".

How to Insert page number in power point that is not #1

Select: Remove or delete all slide numbers and insert a text block. Make the text block very small and drag it to where you want the number to be on the slide. Type any number or label you want into that small text block space. For showing multiple pages in one slide, insert a Table; e.g., a 2 X 2 table will allow 4 pages or a mixture of photos and pages into each quadrant. Use large fonts. Any table with more sections inserted to cut up a slide into discrete parts and it's difficult to read. Graphs are a different story with vertical column graphs easier to see slight differences than horizontal ones.

I need to enter two columns of,values, x and y, to determine the linear equation but my table,only,displays the x column. How do,I get the y column back to enter numbers in?

Use the STAT function
Enter independent x_variable in L1, and y-variable in L2
To do calculations, Look under CALC (see 3rd screen capture).

950b71d3-25e1-4a5b-b0b4-d4d0e82c0d11.png 90b5ca2a-98e9-4ccc-9052-249dc893a0ae.png ffc1318e-337e-4a81-b00d-4150b0b0ee8e.png

My TI-84 won't let me input x values on the table feature and has a bunch of numbers in the x-column

Press 2ND [TBLSET], then use the arrow keys to highlight "Ask" on the "Indpnt" row, press ENTER then 2ND [QUIT].

How to make a 7 row and a 7 coloum in a spreadsheet

Creating a table in Microsoft Excel 2007 allows you to work with that data independently of the rest of the worksheet. First you must define your table, though, which you can do either from scratch or from data already in the worksheet. The process is a simple one. Read on to learn how to define a table in Excel 2007
  • Start off by doing one of the following: Select the range of cells that you want to make into a table within your worksheet then proceed to Step 2 OR Start immediately with Step 2.

  • Click on the "Insert" tab at the top of the document.

  • Find the "Tables" group, then click on "Table." The "Create Table" dialog box will appear.

  • Type in a range for your table if you did not select a range in Step 1. If you did already select a range then that range will automatically appear in the dialog box.

  • Check the "My Table Has Headers" box if the data set you selected already contains the headers you want to use. If you don't check this box, the table will display default header names, which you can then go in and change.

  • Hit the "OK" button at the bottom of the Create Table dialog box to create your table.

  • Thanks for choosing Fixya............ Sandeep

    Hi. I made a web page in Frontpage. When I see it

    The tables are probably nested incorrectly as changing the aspect ratio is moving images. Keep in mind that each row must have the same number of columns, so to keep it simple, the base table has one column, and you need to create a nested table in every row that needs more than one column.
    At the very least, create a table for the whole page, and nested tables for each section. Use this template as a guideline:


    • The

    • menu

    • goes

    • here

    "Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum."


    I need to know how to get to Table Set on the TI-85 because I need to find the x intercepts on the graph, but I can't find it. How do I get to it?

    try this one:

    (first). Set up a function in the TI85. how?
    Step 1. Press the [Y=] key to open the function editor.
    Step 2. Type in the function you want in the Y1= line.
    Step 3. Press [2nd] [QUIT].

    (second). Create a table of numbers using the Y1 function.
    Step 1. Press [2nd] [TBLSET] to open the table setup menu. On the line "Indpnt", highlight "Ask" and press enter. On the line "Depend", highlight "Auto" and press enter.
    Step 2. Now press [2nd] [TABLE] , type in a value for "X", and press [ENTER].
    Step 3. Continue typing more values for X to fill up the table.

    (third). How can I see more decimal places for the numbers in a table?
    Step 1. Use the arrow keys to move the highlight over the number you are interested in seeing to more decimal places.
    Step 2. Read the number at the bottom of the screen. You should be able to see anywhere from 9 to 14 significant figures for your number.

    (fourth). Delete the numbers in a table by:

    (The following procedure will work when the table setup has been set to ask for the values of the independent variable.)
    Step 1. In the table screen, check the bottom of the screen to make sure that the cursor is not blinking at the bottom of the screen. If the cursor is blinking, press the [ENTER] key to stop the cursor from blinking.
    Step 2. Use the arrow keys to move the highlight to the first number in the first column of the table (the "X" column).
    Step 3. Press and hold the [DEL] key to delete the numbers in the first column of the table. The entire table should become clear with this procedure.

    Thanks! I wish it can help you..

    I want to enter in numbers for L1 and L2, but when I go the TABLE there is no L1 or L2 column, only X, and there are numbers entered in the X column that I want to delete. How do I clear the X values,...

    The table is where the calculator displays values from functions entered in the Y= page. To enter numbers into lists, press STAT and select Edit to get into the list editor.

    Table issue

    You will have to assign an onclick function to each of those 5 column headers. There is no way to group those into another element.

    Another option is that you can assign an ID to each of those TDs and create a javascript funtion that will loop through those IDs and assign the onclick function dynamically.

    Microsoft Access 2003

    its hard to fully explain but you can download this file as an example to how you can solve the problem via running a simple query from which you can copy the new phone numbers for the new phone column and paste it on the old phone column . its just that easy .
    go to
    download the file ]sample.mdb[

    all the best

    Not finding what you are looking for?


    Ask a Question

    Usually answered in minutes!

    Top Casio Cameras Experts


    Level 3 Expert

    13435 Answers

    David Shaub

    Level 3 Expert

    2991 Answers

    Steven Wander
    Steven Wander

    Level 3 Expert

    597 Answers

    Are you a Casio Camera Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides