Question about Frigidaire GLTF2940ES Front Load Washer

4 Answers

E70 washer starts then stops and says e70 and beeps

Posted by JILL HICKS on

Ad

4 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.
    New Friend:

    An expert that has 1 follower.
    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Thank you, that was the problem, we had the hoses swapped. i appreciate this site! mike and pam

Posted on Nov 07, 2009

Ad
lumivasos

lumivasos

  • Level 1:

    An expert who has achieved level 1.
    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

En el error E70 quiere decir que las mangueras del agua estan mal conectadas, la caliente en la fria y la fria en la caliente, basta con cambiar el orden de donde se esta suministrando el agua para que quede resuelto el problema.

Posted on Sep 03, 2012

Ad
Gustavo Morales

Gustavo Morales

  • Level 1:

    An expert who has achieved level 1.
    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I do have a faucet combination outlet. Cold water came out very strong and cold and still have the same code. I'm close the hot water pipe and water not go into the washer. I'm just replaced the broken valve and i don't know if is another way to check up this issue. Any idea?

Posted on May 18, 2015

Anonymous

I had the same issue. The hoses were swapped (hot to cold, cold to hot). It means the washer isn't getting cold water. Another possibility is the faucets are not turned on.

Posted on Jan 01, 2007

2 Related Answers

Anonymous

  • 1 Answer

SOURCE: E70 ERROR SIGN

Great news that worked!! I had other issues with my washer and had a repair man come and fix it, when he left I started washing and that's when the E70 showed up uhh he hooked the hoses up wrong.. Thanks a bunch

Posted on Jul 13, 2008

MS_WI_3013

  • 119 Answers

SOURCE: KEEP GETTING E70 MESSAGE

Are you sure its a E70? If so, the hot and cold lines are reversed.

Posted on Apr 26, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frigidaire washer LTF7000ESO error code E70
Good Morning Jazy, this is JK. I see that you are receiving an error message E70. The E70 error means that the Main Control Board is not seeing the correct water supply. I would suggest swapping the hot and cold hoses. Hope this helps!

Mar 24, 2014 | Frigidaire Washing Machines

1 Answer

Kenmore eco cycle front load washer. error E70 displays and stops washer. What does E70 mean?
You should check the model number of the washer. If the model number starts 417, then the washer was made by Frigidaire. In that case, the E70 error indicates that cold water is not being detected at the washer inlet sensor.

In some cases, this could be due to connecting the hot water line to the cold water inlet (and the cold water to the hot water inlet). Make sure that the cold water shut-off valve is open. Try swapping the water hoses (close the shut-off valves first). Try new hoses; some anti-flood hoses will restrict the water flow if they detect damage. Thus you won't have sufficient water coming into the washer. (You can check this yourself. Turn off the shut-off valves. Disconnect the hoses from the washer and put the ends into a bucket. Then open the shut-off valves and check the water flow.) While you have the hoses off, check for debris in the inlet filters.

If the hoses are fine, you probably have a problem with the washer's inlet valve or the reed switch that measures incoming water. The inlet valve should be replaced if you find that only hot water enters the washer.

I hope this helps. Please add a comment with the model number of your washer for more information. It will be on the inside of the door opening (probably at the top).

Cindy Wells

Sep 30, 2013 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

What dose E70 mean
Means if it is Kenmore that the cold water is not entering the machine. Try removing the washer hoses from the shut off valves after shutting them off of course. and check the little metal screens on the back of each hose connection check for dirt inside Hot and cold.

Apr 05, 2012 | Frigidaire ATF6000ES Front Load Washer

2 Answers

AEG Lavamat 76810 E70 7Beeps Does seem to still work but display shows E70 and 7beeps over and over. Many thanks gary
I Have AEG Lavamat 76810 E70 7 Beeps and Beeps never stops

The water was not hot
I took all the multi-plugs out and put them back in the whole machine ALL CONNECTORS
Now it works fine E70 is gone

Jul 14, 2011 | AEG Lavamat 16810 Front Load Washer/Dryer

1 Answer

Washes starts buzzing and blinking and says e70
The e70 error code comes on when the hot and cold water hoses are reversed or not properly installed.

Feb 21, 2011 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

It is stopping in the cycle and reading E70 on the screen.
Hi,

The main cause for this e70 error is that the hoses would have swapped (hot to cold, cold to hot). It means the washer isn't getting cold water.Try to switch between the hoses. Another possibility is the faucets are not turned on.Hope this solution will fix your problem for sure.


Thank You !!

Jul 16, 2010 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

My front loader is not working whirlpool
1 Beep/E10--Error: Water doesn't enter Cause: Water supply problem, Check kinks and faucets
1 Beep/E10--Error: Water leaks Cause: Water connections loose,household drain clog,oversudsing. Correct problems.
1 Beep/E10--Error: Dispenser drawer is open Cause: Washer will not operate if drawer is open.
2 Beeps/E20--Error: Water dosen't drain. Cause: Drain is kinked or household clog. Correct.
3 Beeps/E30--Error: Drum overfilled. Cause: Inlet valve,pressure switch or control board failure.Select drain/spin to remove water. Restart.
4 Beeps/E40--Error: Door is open. Cause: Washer will not operate if door is open. Close door.
5 Beeps/E50--Error: Motor is overheated. Cause: Wait 30 minutes to cool down. Restart.
7 Beeps/E70--Error: Cold water doesn't enter. Cause: Hoses crossed,faucet problem.
15 Beeps/EF0--Error: Oversudsing. Cause: Too much detergent,or improper detergent for machine.
15 Beeps/EF0--Error: Hot water doesn't enter. Cause: Hoses crossed,faucet problem.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jul 01, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

KEEP GETTING E70 MESSAGE
Are you sure its a E70? If so, the hot and cold lines are reversed.




Apr 25, 2010 | Frigidaire GLTF2940ES Front Load Washer

2 Answers

Stops within cycle E70 is error message
E70 Means that the Hot and Cold water lines are backwards. Switch the lines and cancel out the cycle. Turn the dial to drain and spin and pump all the water out of the unit. Then restart the cycle and it should be fine.

Feb 26, 2010 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Kenmore front load washer just beeps doesn't start error code says "lol"
1 Beep/E10--Error: Water doesn't enter Cause: Water supply problem, Check kinks and faucets
1 Beep/E10--Error: Water leaks Cause: Water connections loose,household drain clog,oversudsing. Correct problems.
1 Beep/E10--Error: Dispenser drawer is open Cause: Washer will not operate if drawer is open.
2 Beeps/E20--Error: Water dosen't drain. Cause: Drain is kinked or household clog. Correct.
3 Beeps/E30--Error: Drum overfilled. Cause: Inlet valve,pressure switch or control board failure.Select drain/spin to remove water. Restart.
4 Beeps/E40--Error: Door is open. Cause: Washer will not operate if door is open. Close door.
5 Beeps/E50--Error: Motor is overheated. Cause: Wait 30 minutes to cool down. Restart.
7 Beeps/E70--Error: Cold water doesn't enter. Cause: Hoses crossed,faucet problem.
15 Beeps/EF0--Error: Oversudsing. Cause: Too much detergent,or improper detergent for machine.
15 Beeps/EF0--Error: Hot water doesn't enter. Cause: Hoses crossed,faucet problem.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jan 04, 2009 | Washing Machines

Not finding what you are looking for?

View Most Popular

GLTF2940ES Front Load Washer

  • Washing Machines

Related Question

Frigidaire washer LTF7000ESO error code E70

  • Frigidaire Washing Machines

Open Questions:

0 Answers

HOW I DO FIX ERROR DOOR UN LOC Thi unit door unloc in the middle of cycle

Jul 18, 2015 | Frigidaire GLTF2940ES Front Load Washer

0 Answers

how to fix washer if the lights come on after its turned off

Jun 30, 2014 | Frigidaire GLTF2940ES Front Load Washer

0 Answers

...error message i have a Daewoo washer, model DWD-WD32WS, the door ...

Jun 28, 2014 | Frigidaire GLTF2940ES Front Load Washer

0 Answers

Frigidaire front load washer leaving marks on clothes

Jun 24, 2014 | Frigidaire GLTF2940ES Front Load Washer

See all Frigidaire GLTF2940ES Front Load Washer Questions

Related Topics

Frigidaire GLTF2940ES Front Load Washer Logo

1,199 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

Frigidaire ATF6000ES Front Load...

Frigidaire GLTF2940ES Front...

Frigidaire ATF6000ES Front Load...

Frigidaire ATF6000ES Front Load...

Frigidaire ATF6000ES Front Load...

Top Frigidaire Washing Machines Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Cindy Wells

Level 3 Expert

6242 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. GLTF2940ES Front Load Washer Manual

GLTF2940ES Front...

Loading...