I have just bought a te-2400 and when i insert the PGM key and turn it to REG1 it show "0" on the display instead of "0.00" as the book says it should. Can anyone help me?
Hi.
That's not good. Your dealer should have set up all of the necessary system options in the machine when you bought it. Did you buy it new with your products entered by a dealer?
Mark
Ok.
We'll see if it has it's programming intact first.
Turn the key to PROGRAM or PGM mode.
Turn the power off at the wall.
Hold down RECEIPT FEED button (make sure it's receipt feed, not journal feed).
Turn power on at wall - keep holding RECEIPT FEED.
When you see 'FFFFFFFFF' on the display, let go of receipt feed.
Press SUBTOTAL.
It should print a receipt.
I need you to type out what you see on that printout for me, then we can go to the next step.
Mark
Ok. It might have enough to continue. I'd like to try some prints to make sure.
Check that you have plenty of paper in it, then do the steps below. It will print a lot of info, but don't worry, you don't need to tell me what it is. Just look quickly down the print outs, and see if names have rubbish/garbage in them such as question marks or scrambled characters.
Turn key to program.
1 SUBTOTAL SUBTOTAL (press it twice) - wait for print.
2 SUBTOTAL SUBTOTAL - wait for print.
3 SUBTOTAL SUBTOTAL - wait for print.
4 SUBTOTAL SUBTOTAL - wait for print.
5 SUBTOTAL SUBTOTAL - wait for print.
That is all of the programming on paper, so you can see how complex they are.
Mark
Ok. The prog's a dead Duck.
To reset, I need to know:
1. What country are you in?
2. Do you have a bar code scanner or any other devices connected?
3. Your date format (DDMMYY, MMDDYY etc)
4. If you need to use special operator logins each time an operator makes a sale (usually only used if you pay staff on commission).
Mark
Ok.
Turn power off at wall.
Turn key to program mode.
Hold JOURNAL FEED down (not receipt feed like last time)
Power on at wall
Wait until you see 'LLLLLLLLLL' or '00000000' on display.
Type in 20420 on the number pad.
Press SUBTOTAL.
Wait a few seconds. If you don't see 'P1' on display after 20 seconds, press SUBTOTAL again.
Now turn key back to REG or REG1 mode. You will need to log an operator on. You should see clerk buttons near the key up the top. Just press clerk1 button. Now you should be able to enter sales by typing a price (without decimal point) and pressing a PLU (item buttons to the right of number pad), then press CASH to finish and drawer will open.
Let me know how you get on.
Mark
There is no keysheet software that I'm aware of. Everyone I know just creates the sheets in Excel by making boxes and joining them into a grid.
You may be able to use discounting to remove tax. I have never had to program any tax removal on these.
Try this:
Go to REG mode and enter a few items. Press SUBTOTAL. Now type the amount of tax to be removed and press %- button (sometimes just called % or %1), then press SUBTOTAL again. You should see the amount less tax.
Sorry, I've never had to use it, so I would have no idea. It is an obscure function . Feel free to try setting it up if you like, but I can't be of help as I would have to spend an hour or so at a machine.
×
117 views
Usually answered in minutes!
no i did not
ver:24207
label:AAOAAA
ver.:4434
Label:AAOKAH
FC: E8080000080002
nothing!!!!
1) usa
2) no other devices
3) YYMMDD
4) no special operator logins
thanks
Thanks for all your help. Can i ask another question? How do you print out your plu desctions onto the keyboard sheets? Is there a labeling program?
Thanks again
Just wondering if you caould also tell me how to create a "to Go" button that will subtract tax on food to go?
Thanks
that does work on the tax issues. However inthe book it states that under :allocatable functions" there is a takeout - Use this button to specify if the customer takes out items. Before total a transaction. Press this key for the tax exemption. Any ideas how you set up a Allocatble function?
Thanks
×