Hey Im not sure why you rated me as Inappropriate, I gave you a Soultion, just the way you first phase the question, It sounded like you were stealing internet off your neighbors, which is ofcouse alright with me =) But come on I tried.

220 volts. 4 ton, SEER rating was not used when it was made.

The braided wire is "chassis ground", and should be soldered to the case of one of the pots... the other two are from the coils.
If your guitar has two pickups, you will need to determine which wire is which to determine phase. Different pickup makers use different colors...so you can't tell by the color. One of the colored wires will be tied to ground as well. Hook up the pickup wires one way first (temporarily), then switch them. the louder thicker sounding way is in phase. If it sounds thin, it is out of phase.
Hey, since you are doing this anyway, why not put a phase switch in it?
You can easily find the schematic online. It will double the amount of sounds you can get.

hey im havin that same problem wt can i do

Ohms law applies. Im not sure what a lilovolt rating is.

http://www.ohmslawcalculator.com/ohms_law_calculator.php

or, better

http://www.angelfire.com/pa/baconbacon/page2.html

yeah...buy a step down transformer there in vietnam...im sure they have some there. try to buy the one best suited for your refrigerator in terms of capacity rating. if your ref is big, then buy a big transformer. dont use any type of step down transformer.

Hi,

U can download the drivers from www.driversguide.com

Pl try it



Was this soultion useful?show ur appericiation by rating it

Hey.. Sorry about venting about the bad rating. It was my first Inappropriate rating after trying to help 95 people in the last 2 months. And all of my posts were under the free section, just trying to see if I can help some people out there.

Thanks again for clearing up the bad rating.
Maybe I can help you with something else in the future.
Have a good day.
Best
Mac =)

Hi Ekse,

Thanks for bringing this to my attention. Could you please email me at [email protected] so that we can further discuss it.

Thanks
Alex

There's no magic involved here you rated my reply as:
Rating Locked! (?) leezzy has rated this solution as Inappropriate I was trying to help, I gave you the Master code, that's the code required to reset your Security code.
If you think I'm giving you inappropriate info try a repair shop, then when they have solved your problem, come back to me and tell me I didn't know what I was talking about.

hey ,, well it can be a few things the most common one is memory faults..

to free up some memory
click start then run and type msconfig
click on startup and disable some of the programs that start when your computer start that you dont need. I only leave my spyware and antivirus eunning i disable all the other..

or the second most common is is a corrupted playback program

in this case, remove the program you are using, then dowload and install a new one..

In the even you try the above and it doesnt work, reply on this same tread and we will seek alternate solutions :)

cheers