LG 17'' LCD Monitor VGA 15 pin connector pin diagram

http://harmonyflutes.com/wire/vga-cable-wiring-diagram

http://www.darren-criss.org/vga-wiring-diagram/vga-cable-wiring-diagram-c0a4d90d05ff246d.html

most likely vga cable

The 9-pin port on your PC tower is NOT a video port, it is a serial data port. All VGA connectors are 15-pin. Hooking up to the 9-pin port will not get you a picture. There should be a VGA port on the PC, or else a DVI an/or HDMI port. You can get DVI-to-VGA adapters that work, but only if the DVI port is an analog DVI, not if it is a digital DVI (DVI-D or DVI-DD).

The Balance CM2015 monitor uses a VGA connector,

http://www.ebay.com/ctg/Balance-CM2015-15-LCD-Monitor-Black-/52125929

(The above is for reference only. Not advertising)

A VGA connector is also referred to as a 15-pin D-Sub connector,

http://en.wikipedia.org/wiki/VGA_connector

This is information on a DVI cable, and DVI connector,

http://en.wikipedia.org/wiki/Digital_Visual_Interface

If this is the monitor cable you have, you need this type of adapter,

http://www.directron.com/dviadapter.html

Now LOOK closely.
This adapter has male pins that stick out, and go into a female VGA connector on the monitor. The DVI side of this adapter has socket holes, for a male DVI cable.

IF, your monitor has a male VGA connector on it, and the DVI cable you have has socket holes, you need this adapter,

http://www.directron.com/dvitovga.html

If your monitor cable is not a DVI cable, post back with the style it is.
If nothing else post how many pins are in the connector on the cable, and how they are arranged.

For additional questions please post in a Comment.
Regards,
joecoolvette

If your monitor has a video cable that disconnects from each end, then VGA cables are everywhere, and your best deal will likely be monoprice.com. If it is built-in to the monitor, and only connects at your PC, then I suggest you look at Mouser.com for your solution. Very, very inexpensive, and so an industrial selection of parts, at individual prices.

you have a rgb connection or a dvi connection.

do not engineer your own version of a vga/dvi cable.

just go and buy a new cable, which should be cheap

here is a service guide for this monitor

http://support.acer.com/acerpanam/manuals/acer/0000/servicemanuals/s.g_al1715_book.pdf

Why not just spend $30 to $50 and purchase a "previously-owned" 15-inch or 17-inch LCD monitor?

VGA cable with DB15HD (15-PIN) male at both ends if your PC has VGA DB15HD video out, or DVI cable if you have DVI output on your PC video card.

pin no 1 - Red colour signal (Red colour wire)
pin no 2 - Green colour signal (Green colour wire)
pin no 3 - Blue colour signal (Blue colour wire)
4&5 Not connected
pin no 6&7&8 are (Grounds)RGB Returns
9&10 NC
pin 13 Hohizontal sync signal
pin no 14 vertical sync signal
Not nessasry other pins

It should be 15 pin connector VGA .It should work.

in vga connector their are 15 pins .u have to solve this problem u have a digital meter to cheack contunity of the pins. if there is old wire is connected on crt board .first u cheack 0 omhs continutey to 1 pin to 15th pin. then u sold ur new cable