Camera doesn't turn on or do anything

The date and time plus a lot more information is stored with each picture as "metadata". It can be retrieved in most photo editing programs. After downloading to your computer, if you just right-click on a picture file, the date and time will appear.

download "EOS Utility" for the Mac from USA.Canon.com website or just use a card reader.

Buy a card reader and stop using a USB cable. Card readers are much faster than USB downloads and work as a hard drive. Cameras do not need software to download onto a computer.

Close the Kodak EasyShare software from your system tray (down by the clock).
Go to www.apple.com and download apple quicktime.
After you have installed quicktime successfully, add the videos to the software.
Since the pictures were downloaded successfully, videos are also transferred.

They are usually saved in your My Documents\My Pictures\Kodak Pictures.

Please see the following blog article, as it describes the use of a card reader as a much easier, faster, and less error prone way to download your photos. In fact there are several important reasons discussed in the article for using a card reader vice downloading from the camera. USB Card readers are also very inexpensive these day, with cost virtually not an issue:

http://camerarepair.blogspot.com/2009/01/how-do-i-download-photos-or-pictures.html

turn the printer on, place the picture on the glass, on the printer under mode press the big silver button until the scan light comes on  then press select, you should hear the picture scanning, then on the computer, go under my pictures and you should see that picture. 

Prakticam, unhelpfully don't have anything for their cameras more than a couple of years old and don't seem to care if you mislay the disc you paid for.So be warned, don't buy Praktica. I have the 5200, you have firstly to put your usb in computer, switch on camera, switch camera to view pictures taken mode, and because it auto switches to take picture mode you then carefully attach camera end into camera whilst camera is still switched on! Then go to my computer and click on F: the pictures download. Then to save them click on first pic, hold shift key down and then click on last pic they should all highlight, right click and then hover 'send to' and send by left clicking to my documents. I remember that it took me 4 hours to work it out. Found this looking for manual to download, cannot change date now......

try going to the camera web site see if there is any mac software that will work with your camera or go to the web site of the camera and see if there is a down load for your camera for a mac . or see if your friend has a pc and try to down load the pics on thrir computer.

first install the printer onto the computer, downloading the drivers or using printer disk.
If your printer is already installed on your computer and working you do not need to install it , skip this step.

Then download pictures onto computer, using USB cable.

open downloaded picture by double clicking with left mouse button.
Once you open the picture with picture viewer open file menu and chose print, or click the small printer sign.

If you use oprint preview iit may be easier for you to change printer settings to print the pictures.

yes i have a read time to put my pic on the computer frommy camera help plzzzzdo i have to dnowload anything