Hoover HF7 160E Front Load Washer Logo

Question about Hoover HF7 160E Front Load Washer

2 Answers

Hoover Vision 1600 drum not spinning?

Hi My washing machine Hoover Vision 1600 drum has suddenly stopped spinning, its not moving even on a wash cycle. It does not give any error. Any advise would be gratefully appreciated ! cheer Matt

Posted by Matt Reed on

Ad

2 Answers

danbhoy

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 1 Answer

I have similar problem with same model unit, found brushes on motor worn to point copper contact is hitting and scoreing commutator. Easy checked, ensure power completely disconnected, lie machine on side and gently rotate drum looking in side the motor. The commutator is what looks like a circular block of copper segments which will rotate with the drum and should be evenly worn and coated with carbon from the brushes. If you see a clean copper area, usually in the center, then the brushes are worn down below workable levels. Suggest replacing should resolve problem.

Posted on Jun 08, 2008

Ad

Anonymous

Have the same problem, different model and it looks like I am outside 5 years spare parts. Probably just a belt or something from overloading. Also looks like it would nearly be cheaper to buy a new machine.You must have checked your pump???? What a rip off

Posted on Jun 11, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Hoover optima 614 drum wont spin

Either a broken drive belt or a failed transmission.
0helpful
1answer
8helpful
1answer

Hi i was wondering if you help.my hoover hd vision

my hover washer dryer 1200 spin will not spin water comes into the drum and will not spin
1helpful
1answer

I have a Hoover Vision 1600 plus that has stopped spinning. Water pump works, water inlet works- drum will not spin. Help!

Could be motor or motor brushes you could remove one carbon brush check if its worn should be at least 1/2 inch left in order to funtion well
18helpful
2answers

Hoover vision HD 1400 AAA 8kg washing machine - wont start & four flashing lights on timer delay ?????? any advice pls

can I have the instruction how to use for HOOVER vision HD 1400 AA+A. I lost the manual
0helpful
1answer

Hoover AM1100 Washing machine, wont final spin.

The noise, is it a grinding noisy like worn bearings?

put the washer on drain only - is the pump working ok, take the filter out to see if it is turning ok, does that make a strange noise?

If the pump is fine, its back to that noise, it could be be a faulty tacho on the motor ( regulates the spin speed) or motor bearings - has the motor spindle a lot of play on it?
Let me know how you get on and good look!
3helpful
1answer
11helpful
3answers

Error code 8 on Hoover vision hd 9 kg frontloader. No Manual.

Had same problem wouldnt spin found clip on motor had come loose pushed it back on problem solved!
0helpful
3answers

Hoover Vision 1600 AAA Washing Machine error code 5

High summerzaman,
the error mean an problem by the temperatur sensor of the water. It is possible an defect of the sensor or cable between the sensor and the microcontroller or the controller self.


with regard Andreas
Not finding what you are looking for?

1,230 views

Ask a Question

Usually answered in minutes!

Top Hoover Washing Machines Experts

Oloyede Monsuru

Level 3 Expert

1468 Answers

Mike

Level 3 Expert

4382 Answers

Brad Brown

Level 3 Expert

19008 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...