After reading the disc "disc+? mark" displaying in blue screen. Some times playing for 2mins then hanging
I bought new DVD player 2 weeks back through amazon.com. While playing the DVD am facing the following problems from 1st day.
1. Once i insert the disc, after reading the disc "disc+? mark" displaying in blue screen.
2. Some times playing for 2mins then hanging but disc is rotating very fast.
3. While playing the CD if i pressed menu its hanging but disc is rotating very fast.
4. If i put jpg cd jpg list is caoming and immeditly it went to blank screen.
Please let me know is there any soultion or replacement policy for this.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
follow the steps. God bless you
Insert a DVD lens-cleaning disc into your player and press
"Play" to clean the DVD laser, eliminating picture problems due to read
errors. Do not use a CD cleaning disc as the brushes on these discs can
damage your laser.
Wipe your DVDs clean of all visible marks and dirt using a
lint-free cleaning cloth moistened with rubbing alcohol or glass
cleaner. This further fixes read errors which can damage the quality of
picture and sound.
Disconnect your DVD player from the TV or receiver you have
it connected to. Reconnect the DVD player directly to the "AV" or "Video
In" port of your television, firmly pushing the plug into place, to
eliminate possible noise from the receiver and ensure a clean
Connect your DVD player using an S-Video, component video or
HDMI cable. Standard yellow/red/white RCA connectors cannot carry the
high-quality signal that DVD discs are capable of transmitting, and will
display a particularly poor picture on flat-screen high definition
televisions. Use an HDMI cable, if your television and player support
it, or a red/blue/green component video cable.
Press "Setup" on your DVD remote and enter "Picture
Settings." Make sure your DVD player is set to display images in the
correct screen format ("Widescreen" or "16 x 9" for HDTV sets,
"Standard" or "4 x 3" for older square sets) and scan mode. If you are
using a DVD player that supports "Progressive Scan" on an HDTV or
flat-screen set, activate this setting; for older sets, choose
"Interlace" if given a choice.
It's something about the Burlesque dvd. I have the same problem with mine when I try and play it on my Sony blue-ray player. It's the only disc I have that it won't play. Disc is a DVD Video disc but it will no't play in the Sony player. It plays fine on other dvd players and my computer, but not on the Sony.
Sir I dont think its the dvd that is not working I thisnk its the screen that is starting to fail, it can be that the dvd is not sending the video signal to the screen when you open it and thatt is why you only get the blue screen and nothing else, because if the dvd was not working let it be the laser or a motor the most common message that you get in the screen is no disc, but that is not your case so I would have the screen check on that portable dvd.
You are getting drop out of data from the DVDs, depending on the quality of the orinal DVD discs, some times they will deteriorate after few years. Look for any scratches on the lable side of the DVD. On some discs lable side where the reflective coating may not be protected well, if it is damaged it cannot be read.
I bought mine four days ago and it would not pay the new James Bond Blue-Ray. The screen said your player needs an update. I downloaded the firmware, and it still did not work. I took the disc down to Best Buy and it played fine on an identical DBP 51-FD. Their tech came out with a replacement player and it played fine. Now, however, it will not play the DVD Happily Ever After 2, eve after the firmware update. Strangely enough, the other player played that DVD fine.