Question about Xerox WorkCentre M-24 Color Copier

1 Answer

Xerox workcentre m24

Do you know a way to reset the counters and or how to make the printer part work again? This why I don't like xerox copiers..... They make it hard to work on them... I work on every copier under the sun from 1987 to present and I hate xerox's. I'd realy could use a hand with this problem... If you have any other solution I'd be very greatfull.. Thanks

Posted by Chris Coughlin on

  • Chris Coughlin
    Chris Coughlin Nov 20, 2008

    Thanks for the advise, I kind of thought that was the fix. Not a thing can be done. I hope the person has a boat and in need of a anchor.

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 62 Answers

Cannot be done mate. I would be a very rich man if i could this to xerox's printers. The readings are held on 3 seperate boards, changing 1 of them instantly writes the serial and meter to the new one from the remaining 2. Changing all 3 results in the copier becoming a toaster!!

Posted on Nov 19, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset 2nd bias transfer roll for xerox 7556


On the 7556 and most other Xerox copiers, follow these steps to reset the counter. You do NOT need to call out a tech.

The supply life counters must be reset when some supplies are replaced.

  1. Log in as the System Administrator or Key Operator.
  2. Press the [Machine Status] button on the Control Panel. The Machine Status screen will be displayed.
  3. Select the [Tools] tab on the Touch Screen.
  4. Select the [Device Settings] button.
  5. Select [Supplies], and then under Features select [Supply Counter Reset].
  6. Select the required supply item, and then select [Reset Counter].
  7. Select [Reset] when the confirmation screen is displayed.
  8. Select [Close].
  9. Press the [Log In / Out] button on the Control Panel. The Logout screen will be displayed.
  10. Select the [Logout] button on the Touch Screen to exit.

Feb 11, 2013 | Xerox DocuColor 3535 Copier

Tip

Xerox XD or XC Series Copier Drum Light Drum Unit Reset Procedure


To reset the drum light on just about any Xerox XC or XD series copier press the following key's in sequence and as quickly as possible (with 4 seconds for the first 4 keys)
Press "C" then the far left key (exposure mode) then the "C" key then the far left again.
So in other words C, far left, C, far left
If done correctly the display should go blank.
Then key in 24 as if you were going to make 24 copies.
Now press the "print" button
Now key in 7 as if you were making 7 copies
Now press the print button again.
You should now be getting flashing zero's on the display.
Turn the machine off then on again and your drum light should be gone!
You can usually reset this counter at least once to get twice the life out of your drum unit.
This works on nearly all Xerox XD and XC Series copiers.

on Mar 20, 2010 | Office Equipment & Supplies

1 Answer

Xerox ws m24 drum counter reset?


how we can reset counter of drum unit m24

Nov 20, 2010 | Xerox WorkCentre M-24 Color Copier

1 Answer

Xerox - replacement toner cartridge problem


Not that I know of. Did you receive a chip with the toner? If not that chip would need replaced to reset the counter;

Feb 20, 2010 | Xerox Phaser 6125 Laser Printer

5 Answers

Tonar empty error for xerox phaser 3100 MFP pritner


You have to reset your printer through a hardware module which is permanent resetter. www.nakshatraworld.com 09713862555

Jan 22, 2010 | Xerox Phaser 3100MFP/S Laser Printer

2 Answers

How to reset drum counter for fuji xerox 203A


if the Drum LED is still lit after replacing the drum unit, the Drum counter may not be reset.
Reset the Drum counter as follows:

  1. Open the front cover.
  2. Locate the control panel button under the LED lights on the left side.
  3. Press the control panel button until all lights are lit, then release it.
    The Drum counter is now reset.

Aug 28, 2008 | Office Equipment & Supplies

3 Answers

Xerox Phaser 7300DN Laser - Transfer Unit issue


Hold down Back and Information and turn on the printer. You enter in service mode. Then you can reset CRU counters.

Good luck!

Jun 19, 2008 | Xerox Phaser 7300DN Laser Printer

1 Answer

How do I reset the drum counter?


You have to replace the chip on the drum cartridge. You can order one at this location.

https://www.partsdrop.com/store/

Mar 27, 2008 | Xerox WorkCentre XD125F All-In-One Laser...

1 Answer

Xerox phaser 7400


There really isnt an easy way to do that.
The transfer belt assembly starts off with a fuse on it to blow immediatly on install, and a counter that is internal so that it will end of life and have to be replaced. It's really not a convience counter but an obsolence counter.

Mar 06, 2008 | Xerox Phaser 7750B Laser Printer

1 Answer

Work center 220 xerox


Either remove or short out the NVM battery.
That should reset it.

Jan 21, 2008 | Xerox Phaser 8400 Laser Printer

Not finding what you are looking for?
Xerox WorkCentre M-24 Color Copier Logo

407 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

docukaaf

Level 1 Expert

38 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...