Question about O2 Xda II mini

Open Question

My O2 XDA ii Mini has gone to bootloader mode (It's reading Serial and v.1.02) while trying to ugrade the ROM and Radio (As the phone was showing no GSM and the IMEI was also misssing).Have tried

No IMEI and NO GSM so tried to upgrade the ROM and the Radio without taking a back up of the Original ROM. Now it's in bootloader mode and even when i tried to ugrade it with the 1.13 rom it came back with the error 150: Device does not support utility error (sort of). I really don't know anything about this ROM and Radio so Kindly help....

Posted by on

  • Pritam Pratim Apr 24, 2012

    Whoa I believe thas enuf of info...I thot ppl here wud b knowing much much more than I do and wud b eager 2 help....No prob I wil sort it out by myself n I tel ya aw xperts, within few months time I wil learn aw this stuff n start sorting and helping other ppl find solution(s) 2 their prob(s)....Thanks xpert frenz...

×

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 3 Answers

SOURCE: My o2 xda II mini have a problem

Try to bring your O2 XDA II mini to it's own service center because the problem is in it's program itself or it's memory containing it's program. The service center has their own orignal software utilities for that.

Posted on Mar 18, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: power cut during rom upgrade upto 73%

Hi Kumar,
Nice to find u here . Do u have upgrade of XDA II Mini. I m on original version. Havent used this set in a while as i m on Iphone. So i was wondering if u can help?? Hoping to hear soon, Thnx

Posted on Aug 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Locked out of my galaxy s7 phone cannot remember my pin


I guess Samsung galaxy mobile is locked due to you have entered unlock key more then 5 to 10 times. And now your samsung galaxy mobile is freezed and hard locked.
Now to Unlock samsung galaxy mobile you need unfreeze code and then sim unlock code or sim network unlock pin. You can generate unlock code from imei number of your mobile. it generate 4 codes. First is your sim unlock pin and last is defreeze code.
You can also try this alternate method for unlocking your galaxy mobile.
If you have rooted your mobile and want to unlock it without code then You need custom rom , bootloader unlock file and also flashing tool. And also download samsung driver from samsung site.
Now once mobile is rooted flash rom on it and unlock bootloader for samsung unlocking.
Instead of this you can also try this method to unlock your samsung mobile.
Enter into service mode of samsung mobile by following command *#27663368378# or *#0011#.
then choose debug screen then network lock then select parso sha256 off option. now once your mobile is rebooted it wan't ask unlock code. Howto network unlock samsung galaxy s7 edge

Oct 01, 2017 | Galaxy Cell Phones

1 Answer

My samsung galaxy s3 phone's imei number is 351869051324617. is it original or fake


You need to check with the provider who will run the imei number; noone here is capable of that.

Apr 10, 2013 | Samsung Galaxy S Iii S3 Gt-i9300 16gb...

1 Answer

I want to upgrade my imate kjam to windows 6.1 from 5


My I-mate k Jam totally dead, what can i do, I' dont know service centre in india. Iwant new soft ware installation.

Oct 12, 2012 | i-mate K-jam Smartphone

1 Answer

When i try to upgrade my Imate 9502 it requir Rom Unlock Code. Can any body tell me from where i will get this code because i did not have the box of mobile. Help me Muhammad Waqas [email protected]


As far as I know, there is no way to bypass the ROM unlock code request phase. It is a 15-char long code, different from the phone's IMEI code, which came printed in stickers, both attached to the phone's original box, and inside its printed user manual (loose, i.e. not attached). So, unless you find one of those stickers, I'm afraid you will be unable to upgrade your phone's ROM.
Hope you are able to sort your problems out soon.
Anyway, please, let me know if I can help you any further.
Regards, Carlos

Apr 16, 2011 | i-mate Ultimate 9502 Cell Phone

1 Answer

My i-mate does not start


Hello

you just made a "HimaClearJumpCode.exe" run on ur device(this file exists in ur upgrade folder),and now you are stuck in the bootloader mode

1-hard reset ur device(it wont boot,off course)...

2-plug it in the usb port,u should see that ur system has found a new hardware(if it doesn't,change the USB port)

3-now run the himaupgradeUt.exe.

If this does not work,

1-take the battery off device

2-leave ur device for 12hours without battery,so that backup battery drains...

3-put back the battery,recharge and enter the OS(this option wont work if u have erased the ROM)

4-rerun the upgrade...

The battery might be too low to be charged by the charger,if that is the case;

1) Remove the battery from the phone!
2) Take 3 fresh AAA batteries in series (total 3 x 1.5V = 4.5V)
3) Connect the (+) wire to (+) on the battery
4) Connect the (-) wire to (-) on the battery
5) Hold this in place for 60 seconds.
6) Put the battery in your phone
7) Switch on phone and start charging (via USB)

Apr 14, 2011 | i-mate JAM Pocket PC

1 Answer

I was flashing a rom into my htc touch and i stopped the proccess when handset went white and now it is stuck on the tri colour boot loader screen and activesync wont recognise it?


It is in bootloader mode and there are 50% chances of it's survival. You can try flashing the phone again (use an original ROM instead of a cooked one, try 3 - 4 different ROMS), in case you are lucky the flashing would complete and your phone shall start again. In case the flashing doesnot complete and you are stuck in Bootloader mode, you will have to get it repaired by Service Center as the chances are that the ROM chip will need to be reinstalled.

Nov 12, 2009 | HTC Touch P3450 Smartphone

1 Answer

I flashed a cdma rom on a gsm htc diamond and now its dead it wont go into bootloader,power on, and hard reset does not work help please!!


In case it is not going into bootloader even, then it is bricked and you need to send it to HTC service center. There is nothing that can be done as the bootloader has been damaged.

Sep 12, 2009 | HTC Touch Diamond Smartphone

1 Answer

My HTC p3400i is not coming back to normal mode from flash/bootloader mode..??..Help....


First you can try to soft reset your device. After that, you can try a hard reset just by pressing and holding both the " -" keys right above the answer and end keys and pressing the power button . It will run the ghost image and recover the device ...

Note :

1) make sure your battery is more than 50 % charged .
2)you must do a power cycle in your device ( take out the battery , then press and hold the power button ) before you do a hard reset ...
Video: http://www.youtube.com/watch?v=R53104JTgNI

If none of these helps, you can try to reflash your ROM (Since you're already in bootloader mode), simply plug your PDA to your computer with a USB cable, and download an upgrade ROM from here (http://forum.xda-developers.com/forumdisplay.php?f=408) or just download your original ROM from HTC website and flash it using the instructions in the xda-developer forums. Hope this helps.

Apr 21, 2009 | Cell Phones

2 Answers

Ipaq 4150 dead after computer crash during ROM upgrade


Put it on bootloader then try to update it again.if its not work then you have to find a same device and copy rom image to sd card then you can flash from sd card to your bricket with bootloader....good luck

Oct 07, 2007 | Orange SPV M1000

4 Answers

Unsucessful Rom Upgradation Error


OK your phone is most probable stuck in bootloader mode and needs to accept a USB connection with the correct ROM image to be reprogrammed. You will see on the screen that there stands Bootloader/Serial if you look carefully. Check if you can see this text. Try a master reset on the phone as per rom installation instruction. (Top mennu buttons and reset simultaniously). Let me know there are more ways to solve the problem.

Sep 10, 2007 | Orange SPV M2000 Pocket PC

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top O2 Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Mufaddal  Kurlawala
Mufaddal Kurlawala

Level 2 Expert

132 Answers

shevantha perera

Level 2 Expert

125 Answers

Are you an O2 Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...