Question about Samsung CLX-6200FX Printer

1 Answer

On a Samsung CLX-6200 printer- a message which states "paper jam 0 /open-close door. Where is door located?

Posted by edrakes24 on

Ad

1 Answer

Phillip Lee

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Its the smaller door on the front. It opens to a smaller paper tray.

Posted on Apr 01, 2013

Ad

5 Related Answers

Anonymous

  • 220 Answers

SOURCE: paper jam 1 - samsung clx 2160n

fuser needs replacing.

Posted on Jul 08, 2009

Ad

Hardwork

  • 22 Answers

SOURCE: samsung scx 4100 just decided

Its a mechanical problem.
The best solution for that is to call a service technician nearest to your place.

Posted on Jul 28, 2009

Anonymous

  • 92 Answers

SOURCE: Samsung CLX 2160 "paperjam2" problem

Hi ...

IN CLX 2160, paper jams usually occur in three areas of a printer. The following error messages indicate the area in which the jam has occurred:

  • Jam 0 indicates the paper failed to pass through the first sensor.
  • Jam 1 indicates the paper failed to pass through the second sensor and has jammed around the toner cartridge.
  • Jam 2 indicates the paper failed to pass through the second sensor and has jammed near the fuser.
Your error shows paper jam2 but i am giving you directions to fix the paper jams indicated by each error message so that you can handly any kind of paper jam issue with your printer.
Paper Jam 0 When your printer displays Jam 0, paper has failed to pass through the first sensor.
To remove the jammed paper, follow these steps:
  1. Power your printer off.
  2. Open the cover of your printer.
  3. Gently pull the paper toward you to remove it from the printer. Note: If you do not remove the paper slowly, you can damage the printer and the printer will require service.
  1. After removing the paper, make sure there is no additional paper in the paper path.
  2. Close the printer cover, and then power on your printer. jam%200.jpg
If your printer still displays Jam 0 after you turn on the printer, unplug the printer, and then repeat the steps above. Make sure all paper has been removed and the printer's rollers are in their correct positions. Before turning your printer back on, make sure all the cover doors are fully closed.
Paper Jam 1 When your printer displays Jam 1, the paper has failed to pass through the second sensor and has jammed around the toner cartridge.
To remove the jammed paper, follow these steps:
  1. Power your printer off.
  2. Open the cover of your printer.
  3. Gently pull the paper toward you to remove it from the printer. Note: If you do not remove the paper slowly, you can damage the printer and the printer will require service.
  1. After removing the paper, make sure there is no additional paper in the paper path.
  2. Close the printer cover, and then power on your printer. jam%201.jpg
If your printer still displays Jam 1 after you turn on the printer, unplug the printer, and then repeat the steps above. Make sure all paper has been removed and the printer's rollers are in their correct positions. Before turning your printer back on, make sure all the cover doors are fully closed.
Paper Jam 2 When your printer displays Jam 2, the paper has failed to pass through the second sensor and has jammed at the fuser.
To remove the jammed paper, follow these steps:
  1. Power your printer off.
  2. Open the cover of your printer.
  3. Gently pull the paper toward you to remove it from the printer. Note: If you do not remove the paper slowly, you can damage the printer and the printer will require service.
  1. After removing the paper, make sure there is no additional paper in the paper path.
  2. Close the printer cover, and then power on your printer. jam%202.jpg
If your printer still displays Jam 2 after you turn on the printer, unplug the printer, and then repeat the steps above. Make sure all paper has been removed and the printer's rollers are in their correct positions. Before turning your printer back on, make sure all the cover doors are fully closed.

Please vote if this helps ... Cheers :)

Posted on Jul 29, 2009

Anonymous

  • 168 Answers

SOURCE: Constant Paper jams on CLX-3175FN

The fact that there appears to be no actual jam tells me that it is not picking up paper out of the tray. Try some alcohol on the pickup rollers, rubbing well. If that helps, replace these rollers.

Posted on Aug 13, 2009

SamsuTech

  • 113 Answers

SOURCE: I have a Samsung CLX-3160FN, and after every page

Hi,

it is most likely that the fuser actuater arm is not sitting back to the sensor properly. open the back door you will be able to see the fuser, on your right hand side you should be able to see a fliper that sit in between a sensor. try to adjust the fliper flag and see if it works.

if it still continue to give you the same error. try remove the fuser four screw 2 side on each. adjust the flag again and fix it back. it should work and double check for any lose small pices of paper jam in the printer.

Posted on May 18, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Paper Jam 0 , OPEN/Close Door Message Samsung SCX4100


seems as if the motor responsible for taking in the paper has stopped working and may need to be replaced

Dec 26, 2016 | Samsung SCX-4100 All-In-One Laser Printer

1 Answer

How do I remove a paper jam?


Dear
Pl. select correct media size in pc/printer as actual media. In general all samsung printers are recover from paper jam on opening and closing of the door. If your problem persists pl. up load a jam paper position photo.
Thanks and Happy new year 2015.

Jul 27, 2014 | Samsung color multifunct laser print...

1 Answer

Samsung CLX-3160N Document jam Scanner Error


the printer samsung clx 3160nprinter to check the any papper part .to clear the papper jam then will be the adf scaner sencer hang.so you can change the adf paper senser or correct fix the senserliver. best wishes

Apr 05, 2013 | Samsung CLX 3160fn All-In-One Printer

1 Answer

On a clx-6200 message says "paper jam 0-c=open/close door. what door is this?


It is telling you that there is a paper jam. Open the door, pull the jammed paper out, close the door, it should clear the message.

Apr 21, 2012 | Samsung CLX 3160fn All-In-One Printer

1 Answer

Printer says "scan unit open or paper jam 2" Hav...


Dear
The printer paper jam-2 cover may be opened or not locked properly.
This door is at back side of the printer.
Thanks.

May 21, 2010 | Samsung CLX-3175FN Color Laser All-in-One...

2 Answers

I have a Samsung CLX-3160FN, and after every page


Hi,

it is most likely that the fuser actuater arm is not sitting back to the sensor properly. open the back door you will be able to see the fuser, on your right hand side you should be able to see a fliper that sit in between a sensor. try to adjust the fliper flag and see if it works.

if it still continue to give you the same error. try remove the fuser four screw 2 side on each. adjust the flag again and fix it back. it should work and double check for any lose small pices of paper jam in the printer.

May 15, 2010 | Samsung CLX-3160 All-In-One Laser Printer

1 Answer

My samsung CLX-3160 says "paper jam" and yet there is no paper jam


Open the back door, and inside at the top above the fuser there is a cover that will lift up. In front of the cover will be a spike.

Life the cover, and let the spike (a paper sensor) go into place under the cover and replace the cover and close the door, and it should work.

The spike is lifted as paper passes through.

If you ever lifted the spike while the cover was open and then closed the cover, the spike can't get back so is always lifted and it thinks there is always paper

Mar 11, 2010 | Samsung CLX-3160 All-In-One Laser Printer

1 Answer

CLX 2160 - paperjam


There is probably a jam in the paper feed area. Pull the paper tray out and stick your hand in to find and remove any paper stuck there. Then reinstall the paper tray and open and close the front door of the printer. The jam should be cleared.

If it is still showing paper jam, pull the tray out again and look to make sure you didn't miss any paper, then check the other areas of the printer (starting with the exit area) for paper.

Oct 24, 2009 | Samsung CLX-2160N All-In-One Printer

Not finding what you are looking for?
Samsung CLX-6200FX Printer Logo

397 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Cindy Wells

Level 3 Expert

6220 Answers

The Knight
The Knight

Level 3 Expert

76466 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...