3Com OfficeConnect 802.11g/b Wireless Access Point Logo

Question about 3Com OfficeConnect 802.11g/b Wireless Access Point

1 Answer

3crgpoe10075 status led blinking with no stop

I bought some days ago this 3com wireless access point in order to use it as repeater to another access point. I tried to configure it and after resettign to factory 2 or 3 times [ and even before doign this ] i found that the STATUS LED is blinking in a non described way. At some point the STATUS led was blinking some seconds and then the AP was working - after some time - and after powring the device it starts to blink [ status led ] with no stop for 30 times or 40 times and then stops then blinking red light for tens of times - the 3com AP can be seen by my computer but with secure AP and no way to log in to it. and anyway - i think there is a firmware problem inside it. is there a way ( to reset to factory setting ) except pressing on reset upon powering on for long time [ maybe 1 minute or less a little ] ?

Posted by Sami SLIM on

  • Anonymous May 29, 2008

    3crgpoe10075 status led blinking



1 Answer


  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Hi ,,, i got yor problem. as ya said its not allowing ya to log nto it with security enabled. Ya can try to log into it with the ethernet cable as their wil be an ethernet LAN port onthe access point. I f ya know the default or the present ip of AP then ya can assign a static ip of the same range to yor computer like eg. ap is 192.168 .1.1 then your comp can have and ya can log into it thru the ethernet cable and disable the security. i hope ya know how to assign a staic ip add to yor compuetr. or check the screen shots on brivers.com n select the "network connections" screen shots to assign a static ip address to yor' comp. feel free to chat with me on samrat101 thru yahoo or msn messenger or drop a mail on [email protected] for ny wless n ipphone issues -- take care ,, samrat

Posted on Mar 08, 2007


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


Blinking led

excuse me guys i got a problem with this device
Seirra wireless AT&T mobile hotspot elevate 4G 705s i want to unlock code or unlock code ! i bought it from america
support 800-331-0500
imei 012701003466959
version SWI9200H_03.05.09.06AP
PLEASE help me
this my e mail: [email protected]

I'm upgrading firmware of the 3com 7760. I'm get from 3com.com and i download a file .img, but in the 3com web interface say "Please Input Address Path for Upload". I selected the file .img. Excuse me...

i know this was from a while ago but 3com 7760's have a problem when uploading it files either firmwere or setting backup files you have to use internet explorer or you will get the "please input address path" error



3com 3crwdr100a-72 how do I reset the router

For 3com type of routers, you must connect firstly to 3com setup, By:
First: open your browser and type
Second: you will find adapter setting and reset it, it all depends upon your router's software.
Third: the easiest way is to reset it from the small button in the back of your router.

Cannot find key or passphrase for the 3com access point. The wii is looking for the key or passphrase

Key's are usually installed by the one that installed the Wireless, if you are the one that installed it try to login into the router and disable the security or change it.

Setup 3Com Wireless LAN Access Point 2000 as a wireless bridge

Just u enable the DHCP in ip setting option.

then your extender PC shuld enable the dhcp automatically

I have 2 3COM 3CRWE454G75 -> AP, it does work in AP repeater mode

find the ip address problem or the firewall of there or proxy servr is there and re-configure it then you get the it and check the region if not same that also creating problem sir,

3com router encryption

Go to option menu-click the security option

Se the password under the any one of the security parameter

save the configuration


The repeater must be the same brand as the signal it is repeating. Different routers / access points work in slightly different ways and the current generation of wireless repeaters aren't smart enough to work with other brands.

It's kind of like trying to put an engine from a Nissan Altima into a Honda Accord... both make the car move but they aren't the same inside.

Keeps rebooting, never start

I have the same problem. You have solved ?
Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top 3Com Computers & Internet Experts


Level 3 Expert

4382 Answers

Muzahura Frank

Level 3 Expert

2071 Answers

Stewart Dibbs

Level 2 Expert

415 Answers

Are you a 3Com Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides