Kenmore microwave Keypad display shows -F2-. Unplug unit for 20 minutes or so and microwave will work fine for a short time. Keypad display then goes back to -F2-.

1 Answer

William Miller

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.
Kenmore Master
9,179 Answers

If this has a controller that runs a microwave and an oven, then the problem F2 means a temperature related fault such as a bad temp sensor / thermostat or a defect in the control board. If it's just a microwave, then the problem is likely a failing keypad. In many cases, those can be replaced economically. If you repost with your exact model number (62622 is not a complete model number) then we can advise you further and more specifically.

Posted on Nov 25, 2006

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Frigidaire microwave key shows a lock and no keys work

Here is a previous answer that might be of help.......

The first thing I would suggest is a hard reset. Unplug the unit for a minute or so. Then plug it back in, set the clock and try again.

If it is still locked or goes into lock mode by itself, the "clear" key on your keypad may be shorting.
Here's how the child lock works on model FMV145:

Child Lock-Out
You may lock the control panel to prevent
the microwave from being accidentally
started or used by children.
To lock or unlock the controls, press and
hold CLEAR/OFF for about three
seconds. When the control panel is
locked, an "L" will be displayed to the
extreme right.

Read full answer

Jun 07, 2016 • Frigidaire Microwave Ovens

0helpful

1answer

SAMSUNG MICROWAVE SHOWS SE AND WILL NOT WORK.WHY?

SE is an error code for a shorted keypad, although the keypad might not really be shorted.

Unplug the oven for a few minutes to see if it clears the error code. If not, then leave it unplugged over night. If the problem persists, then you probably do have a shorted membrane switch on the keypad.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/david_29ad5d1dd86564b0

Read full answer

Aug 29, 2014 • Samsung SMH9187ST Microwave Oven

0helpful

1answer

HOTPOINT COUNTERSAVER PLUS RVM 1435 DISPLAY READS F3

"F3" on a GE / Hotpoint microwave means you have a shorted membrane keypad.

On RVM1435-series microwaves, the membrane keypad is not available as a separate part, so you would have to order the control panel frame assembly which comes with a new keypad.

In this case, you simply move your circuit board into the new frame. That is a simple do-it-yourself job.
You can find helpful exploded view diagrams and order parts by entering your full model number (RVM1435XX###) from the tag on the oven here.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

Then you unplug the keypad (as per the photo below) and move the circuit board into your frame.

Some connectors on the relays have a lock:

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Read full answer

Nov 23, 2011 • Hotpoint RVM1435 Microwave Oven

3helpful

1answer

Kitchenaid microwave model KHMS155L, starts randomly for 3 minutes with "PAN" flashing on display screen, than locks up with "F-2" message on display screen

"F2" means you have a shorting membrane keypad. The "Pan Heat" key is shorting.

On these models, the membrane keypad is not available as a separate part, so you would have to order the control panel frame assembly which comes with a new keypad.

In this case, you simply move your circuit board into the new frame. That is a simple do-it-yourself job.

You can find helpful exploded view diagrams and order parts by entering your full model number* from the tag on the oven here.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

Then you unplug the keypad (as per the photo below) and move the circuit board into your frame.

Some connectors may have a lock:

* The exact part number you need will depend on your exact model number. Models in that series are shown below:

KHMS155LBL0
KHMS155LBL1
KHMS155LBL2
KHMS155LBL3
KHMS155LBT0
KHMS155LBT1
KHMS155LBT2
KHMS155LBT3
KHMS155LSS0
KHMS155LSS1
KHMS155LSS2
KHMS155LSS3
KHMS155LSS4
KHMS155LWH0
KHMS155LWH1
KHMS155LWH2
KHMS155LWH3

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Read full answer

Dec 17, 2010 • KitchenAid KHMS155LSS 1000 Watts Microwave...

0helpful

1answer

Microwave oven not working and digital display show "-F2-". from time to time a beeping sound occurs and then the clock displays properly. But shortly after that the "-F2-" display shows again

F2 on a Maytag / Kitchenaid / Whirlpool model means you have a shorting membrane keypad.

If and when an oven is coming on or doing anything by itself, this is very dangerous and can result in a fire.

So until it is repaired, please leave it unplugged or leave the door open when it's not in use, and of course one should never leave a microwave unattended while cooking.

If you (or someone you know) might want to replace it yourself, I have uploaded a handy guide with pictures showing you what's typically involved.

You can find helpful exploded view diagrams and order parts by entering your full model number here.

There should be a "mini-manual" (tech sheet) hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting, testing, and locating components.

If you would like to have us do this repair for you, we do that for $39.95 plus part costs nationwide.

But please note that for some models, the membrane keypad is not available as a separate part, so you would have to order the control panel frame assembly which comes with a new keypad.

In this case, you simply move your circuit board into the new frame. That is a simple do-it-yourself job.

Please contact us with your full model number and we can tell you if yours is one of these models, and if so, we'll also give you the part number you need to order and a link to the best priced supplier.

Either way, we can let you know what your options and costs would be and send you other helpful info.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

Feel free to contact me directly (and please remind me of your full model number from the tag on the unit) for more information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
[email protected]
http://www.microwavedisplay.com
Microwave Oven Control Panel Repair Nationwide

Read full answer

May 16, 2010 • Whirlpool MH1150XMQ Microwave Oven

0helpful

1answer

Will not operate. displays f2

F2 means you have a shorted membrane keypad.

On some models, you can get the membrane keypad replaced by a servicer or your can do it yourself, but on some models, you would have to order a new control panel frame which comes with a new keypad.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Read full answer

Apr 25, 2010 • KitchenAid KHMS155L Microwave Oven

0helpful

1answer

F2 on the display of an whirlpool microwave oven

F2 on a Whirlpool means you have a shorted membrane keypad.

On some models, the membrane keypad is not available as a separate part, so you would have to order the control panel frame assembly which comes with a new keypad.

In this case, you simply move your circuit board into the new frame. That is a simple do-it-yourself job.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

Feel free to contact me directly with the full model number from the the tag in or on the unit and I can give you an estimate and/or do-it-yourself instructions and links.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
[email protected]
http://www.microwavedisplay.com
Microwave Oven Control Panel Repair Nationwide

Read full answer

Mar 07, 2010 • Microwave Ovens

2helpful

1answer

Kitchenaids microwave error message F2.Q1. What to

F2.Q1 Not reading keypad
inputs
1. Unplug microwave oven or disconnect power.
2. Replace the user interface board (UIB).
3. Replace the door control assembly.
4. Replace all parts and panels before operating.
5. Plug in microwave oven or reconnect power.

Many of the error codes may be solved by power cycling: unplug microwave oven or
disconnect power. After one minute, plug in microwave oven or reconnect power.

i found this info on a tech sheet hope this helps, let me know how it goes... some of those electronics had 5 year parts warranty i would check that out....Also u might be better of buying a new one if its out of warranrty as some of those boards are expensive, obvioulsy unplug unit first try to reset it self.

Read full answer

Feb 14, 2010 • KitchenAid KHMS2050SSS Microwave Oven

1helpful

2answers

F2 code on display - microwave does not heat

F2 on this model means you have a shorting membrane keypad.

If and when an oven is coming on or doing anything by itself, this is very dangerous and can result in a fire.

So until it is repaired, please leave it unplugged or leave the door open when it's not in use, and please do not leave it running unattended.

On this model, the membrane keypad is available already mounted on a new control panel frame. It runs a little more, but saves a lot of time consuming and aggravating work.

In this case, you simply move your circuit board into the new frame.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

Then you remove a few more screws and disconnect the wires.

It is part # AP3673562 (same as 8205018) and runs $80.97 + shipping here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.