At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I was watching T.V. when the picture started fading, almost surreally and the tv turned off. Now it wont turn on. The picture was fine before this happened. I was watching it and it started becoming darker and dissapered. All this happened with a couple of seconds.. now it wont turn on at all..
Have the same problem on my Daewoo tv. Replaced the fuse as suggested but as soon as I plugged in the tv it blew the fuse again. Tv is about 5 years old. Have the same problem on my Daewoo tv. Replaced the fuse as suggested but as soon as I plugged in the tv it blew the fuse again. Tv is about 5 years old.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This chassis model line had issues with the vertical output IC shorting causing shut down.
It also had issues with intermittent solder connections in the Horizontal Circuit. I would not try to fix it your self unless you are very familiar with Projection circuitry and electronics background.
Hope this helps,
Skyassoc
I have two RCA HD52W59 TV's. I have had one for 3 years and one 4 years. The one I have had for 4 years is giving me the problem. Last week the tv turned off while watching it. It wouldnt come right back on. 10 minutes later we tried and it worked fine. the other night the kids were watching and it turned off and smelled like something burning. I tried turning it right back on and got no power at all. I tried to turn it on two days later and it made a buzzing noise and the green light went out. Never did get a picture, no powering up on the screen. Any ideas? Don't want to spend alot of money. Really loved the TV hope it isnt junk now. Better yet I hope the same thing doesnt happen to the other one I have.
Isolate filament voltage from CRT,i.e. unplug
Crt socket from pix tube.Measure filament voltage on CRT PCB.If present,suspect bad pix tube.If missing,solder any/all connects in
filament circuit,meaning CRT board first then
main PCB.
Sounds like you have a problem with the blue gun in your picture tube or its drive circuit.
You might remove the back cover and gently tap on the neck of the picture tube using a plastic
screwdriver handle while watching the screen in a mirrow. If the picture flashes back on or on and off then the picture tube is the problem.
If this is a projection tv you have three separate tubes : red, green & blue.
you'd need to tap the blut one.Gently!!!!
Stargazer
Hello Robert,
the picture tube on your TV set is exausted. Please contact your nearest Authorized Sony Service for further help/advice.
After all, Sony is a good choice. The next TV set you buy could be one of Sony-s Bravia LCD.
Kind regards,
Arpad
its a Sharp 25K-M100 25" TV,
Have the same problem on my Daewoo tv. Replaced the fuse as suggested but as soon as I plugged in the tv it blew the fuse again. Tv is about 5 years old.
×