Re: i hook my cam corder up to the my tv it will play but...
You are likely using the S-Video cable (multi-pin cable that connects to the front of the camera below the spotlight). This cable carries video but not audio. To get audio, use the multi RCA to 1/8" adapter (has red, yellow, and white cables and plugs into the side of the camera)
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you dont have rca jacks on tv then you will need to get a converter bob with rca jacks in and anti out to tv or youcould try using your vcr with the rca jacks on it and put rca cable from dvd out to rca vido in and audio in then hook up your anti cable out to anti in on tv.should work cam corders do.
Hi There, Try this: Connect you camcorder to your tv set via a/v input cable. Put camera in cam mode so you can see the picture on the tv. Turn up the volume on tv and if it squeels, the mic on the cam is ok. Record something and then play it back on the tv, if its ok, then all your audio is functioning. This means that the SPEAKER on your camera is defective.
Thanks, mr cicmo
Someone here recommended on another post to put the lense cap on &
videotape the blackness in a quiet room for 5-10 mins. I tried this as
a last resort & it worked. When I played back the tape, no more
skipping or gray lines. I had 4-5 SOLID gray lines with skipping video
& audio in between on every tape I put in. I think the person who
helped me solve this said that it was a result of the tape alignment
going off. My camera is a Canon zr80 digital camcorder. (Called Canon, they had me reset it & then recommended sending it in).
yes !! but you gonna need the software (program) to make this happen. you can check thru the internet and search by the manufacturer brand web site and click on downloads , follow instructions and hopefully you ll be able to play and watch videos
YOu should have your our from your cam to the input of your vcr and the output of the vcr to the input of the tv... then simply set your vcr to the input channel that your cam is connected to ans it should show up on the tv, if it does not hit the tv/vcr button on the remote ... hit record and our done
I see on the form that some of you have the cannon ntsc zr 85
I also have this cam corder when I turn it on I
have a black screen both on vido and card can not see
nothing play back is all right or what is on the
tape on the screen in the lower left hand bottom
corner is the word FERNAN what the heck is that
like another person on hear I thought I pushed
the rong button any one help love to hear from you
thanks tom [email protected]