There is a switch on the right side of the unit labelled Video Out (switch facing front of unit) or TFT On (switch facing rear of unit). First make sure that the switch is on TFT on. If it is then switch to Video out and then back to TFT On. This made our screen starting displaying again when it was black.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1. Turn on the DVD player.
2. Press "Setup"
3. Go to "Preferences".
4. Press "Play"
5. Enter 2-5-1-5-3-5 (251535 in continuous sequence of keys on the remote) Nothing will show on the screen.
6. Press "Left" then press "Down"
The current region code will be displayed.
7. Press "0" for region free.
I have just done this on mine and it worked perfectly.
You can trick the player into thinking the cover is closed and still play DVD's.
Open the lid and notice the small button on the top right side.
Pressing the button will simulate the "lid down" so the disks will play.
You can even see the cool red laser when there is no disk.
There is a small switch on the right side where all the audio/video ports are. If that switch is forward in the "video-out" mode, the onboard (TFT) screen is shut off. Move the switch back to "TFT" mode. Hope this helps.
turn on the power and open the dvd axcess door, inside where the dvd goes is a small little push down switch, push this down, it is in the upper right side. this will let you see if the laser is powering up,if you see no red light ,your laser is bad. hope this helps