How do i delete stored memory? - Brother SX-4000 Typewriter

hi,
Do the following for deleting items in memory.
Press and hold down button and press store /retrieve button

You will see the memory program as follows



The first line reffers all the stored

Else shows individual ecg in memory ( by name or by date)
To delete all ecgs select delete and press button
If you want to delete one by one then select the ecg recording which you want to delete and press
ok

Hi, if you reset the phone it will only delete data stored.
I think that the memory full might be that because messages stored are stored in two different places,cell phone memory and external SD memory card. you will need to check those out first and see what has not been deleted.

Also Sometimes your data on the phone can also cause the 'message full' . You might not need to reset the phone, just try and delete some data from a away from the phone, i think that might safe you from resetting the phone.

Hope that helps..

hi,
do the following for deleting items in memory.
Press and hold down button and press store /retrieve button

u will see the memory program as follows



the first line reffers all the stored

else shows individual ecg in memory ( by name or by date)
to delete all ecgs sect delete and press button
if u want to delete one by one then select the ecg recording and press
ok

This camera has small internal memory like 32MB to store few pictures and shows no memory space message after storing these few picture files.
You need to insert memory card in camera and go to menu and select Copy option to copy internal memory images into memory card then take out memory card from camera and delete internal memory pictures one by one or perform format memory to delete all of them at once.

Take out memory card, if any, from Sony DSC-S650 camera memory slot
Go to Menu, Settings and Format memory
This will delete all picture files in internal memory and refresh it for next few pictures.
Internal memory is not big to store many pictures, use memory stick in camera to store many many pictures.

I think that all faxes store in memory, you should go to the store and ask for it to be deleted!

Hello,
Here are the commands to run the phones memory dial (speed-dial).  I have included the instructions for deleting and changing numbers as well.  It is listed below.  I hope this helps you out.
Ken

MEMORY DIAL INSTRUCTIONS Store up to ten 20-digit numbers in memory for quick dialing. Storing a Number in Memory 1. Make sure the phone is OFF (not in TALK mode). 2. Press the MEMORY button. 3. Press a number (0-9) to store the dialed number in that memory location. 4. Press the MEMORY button again. 5. Use the handset number keypad to enter the telephone number (up to 20 digits, including pauses) and press the MEMORY button again to save the number. The unit beeps to confirm. 6. To enter another number in a different memory location, return to step 1 and repeat the process.
Storing a Redial Number 1. Repeat steps 1 through 4 in Storing a Number in Memory. 2. Press the REDIAL button. 3. Press the MEMORY button to store the number. You will hear a confirmation tone.
Changing a Stored Number 1. Repeat steps 1 through 6 in Storing a Number in Memory. 2. Press the MEMORY button to store the number. You will hear a confirmation tone. The old number will be overwritten with the new number.
Dialing a Stored Number 1. Make sure the phone is ON by pressing the TALK button. 2. Press the MEMORY button. 3. Press the number (0-9) for the desired memory location. The number dials automatically. Inserting a Pause in the Dialing Sequence Press the PAUSE# button once to insert a delay in the dialing sequence of a stored telephone number. A pause is needed to wait for a dial tone (for example after you dial 9 for an outside line, or to wait for a computer access tone). Each pause counts as 1 digit in the dialing sequence. If you need a longer pause, press the PAUSE# button twice.
Deleting Stored Numbers 1. Press the MEMORY button. 2. Press the desired memory location (0-9). 3. Press the MEMORY button twice to delete the entry. 4. You will hear a confirmation tone.

MY PHONE MEMORY IS OF 44 MB...I HAVE NOTHING IN THE PHONE MEMORY STILL IT IS SHOWING ME "MEMORY FULL DELETE SOME DATA TO RECIEVE NEW MSG'S". BCOZ OF THIS I AM NOT ABLE TO RECIEVE ANY MSGS. THERE IS A FILE NAMED LIFEBLOG.DB IN THE PHONE MEMORY WHICH IS OF 30 MB AND CANNOT BE DELETED.THERE IS NO MUSIC AND VIDEOS STORED IN THE PHONE MEMORY. IT IS TOTALLY EMPTY. PLEASE HELP....VERY WORRIED

Hi alot of people have been having this problem but the only way of getting more memory is to delete something off the phone like sent messages any phone numbers that you dont need or use you need to go through your phone and check everything and see what you dont need and delete.
Like if when you send a message your phone might store it so have a look and delete if their is any also the best way freeing up memory i found was to delete most of the ringtones that came with the phone as i found that i didnt use any of the free ones and i only used the ones i put on their. their is loads you can delete and doing this will free up loads of memory let me know if you need further assistance.
Just remember everything that is saved on the phone is taking up memory so delete everything you dont use and this will free up loads of memory.

Deleting files from your memory card is not enough. Usually the files received threw bluetooth will stored to phone memory and then prompted to store somewhere else by the user. So delete/move unwanted files from phone memory to memory card. Delete all the messages stored in your SIM card too.