What is the problem of my Digicam when i Turned it ON the LCD screen has blured display and I can only see lines and pink color of the display.. can anyone help me fix the digicam.. I appreciate all ur suggestions thanx.

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.
Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts

Check your connections / cables. Sometimes VGA cables will display color hues if not firmly attached.

Most defects of the picture on the LCD display, typically points toward a defective display. We've repaired a lot of units with lines, splotches, color problems, etc. just by replacing the display.

pink and fuzzy, what a place to be, no?
no photo posted, so not much anyone can do but guess.
sounds(seems) like a bad LCD
if the PC was made in 2008 the nvidia GPU chip has solderballs
defect. try twisting the screen then base see if screen changes,
yes= bingo. for bad GPU/LCD.
this PC is carbon dated at year 2007, so is in the window bad GPU.
no screens post
do the twist (no not chubby checker ) but by hands.
if the screen changes, with gentle twists the GPU /LCD is bad.
if only the screen frame changes the lines or colors twisted the screen LCD is bad (sure it is cable is falling off inside , only happens on molested, LCD, (service) as HP has it taped down secure day one, but others forget to put it back correctly.

Connect an external display to the computer. If the lines and distortion shows up on the external display its the video card, which is attached to the logic board. So, the whole logic board will need to be replaced.
If the lines and distortion don't show up on the external display the issue is the LCD module, which will need to be replaced.

Hi there some how your camera LCD pressed by out side & the screen is damages. That's why you get the lines. Specially its come some particular area in the LCD screen. Just the way of resolve is resolve the LCD screen. Thanks & waiting for your feedback.

COLORS OF LCD SCREEN HAS TURNED TO PINK AND PURPLE WHAT TO DO NOW?

No, LCD screens are not repairable, they're only replaceable.

Try taking pictures and download them to a computer. Check the colors and evaluate the quality compared to what you have seen in the LCD display.
If the pictures are good and the colors seem to appear good on the computer, then some thing is either not adjusted correctly for the LCD or you may have a menu setting which is incorrect. Check all setting in the menus.
Test the camera again, and see what the colors look like in the LCD display.
If both the LCD display and the pictures on the computer are the same, then some problem exists in the camera, and may need fixing, or sell on a site such as Ebay for parts or repair as is.

sounds like the linear adjustment is out of whack.....most projection type tvs, projection, lcd, plasma, have to be correctly aligned so that the color grids overlap each other to properly display the correct hue being created. you'd need the service code to re-adjust it, or have it serviced. also possible that one of the color grids is bad, but if you have all three (red,blue,green) colors showing on the entire screen area i would doubt it