Question about Transcend T.sonic 610 MP3 Player

XP does not detect player

Windows XP is unable to install the T sonic 610 automatically. It reads it but then asks for the location of the drivers. Am connecting through the USB and am sure that the USB drive is working as its recogonizing my digital camera without any issues and no drivers needed there. I also tried installing the firmare update from the T Sonic website to no avail. Have lost all hope. Please help. I have an Windows XP F1 partition on my PC (Office laptop). Could this be the issue? Please help

1 Answer

ThaMp3Doctor

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.
Master
8,597 Answers

Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.

T.sonic cannot operate after it was formatted in Windows
Formatting T.sonic using the “Quick Format” or “Full Format” option in Windows destroys the
default format of the T.sonic. To retrieve the default format, you must link to
http://www.transcendusa.com/ and download the firmware updates for the T.sonic.

Posted on May 23, 2008

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Hello, I was given it an transcend t.sonic 610 as a present. So far so good... But now: The installation CD was not part of the present! What do I do to get the nessecary drivers? And: What do I do to...

No drivers are required if you have windows ME, 2000, or XP. These Windows operating systems have built-in drivers to support T.sonic.
Simply plug your T.sonic into an available USB port and Windows will install the files needed. A
new Removable Disk drive with a newly assigned drive letter will appear in the My Computer
window.
If you would like to study the user manual of this device, it could be downloaded:

http://www.transcendusa.com/support/dlcenter/Manual/TS1GMP610-EN19.pdf

Thanks.
gylacz

May 03, 2011 | Transcend T.sonic 610 MP3 Player

1 Answer

I HAVE 1 GB THIS ONE T.SONIC 610 MP3 . MY COMPUTER WITH WINDOWS XP DOES NOT DETECT THE ITEM ,

try to download the driver for this player from the web site install it in the computer and then try..
hope this helps

Sep 29, 2010 | Transcend T.sonic 610 MP3 Player

1 Answer

T.sonic 610 V3.4 1GB Ipod

1.download the appropriate firmware from here 2.press and hold reset button for 2 seconds 3.run the firmware updater 4.press and hold "play" button while connecting to system. 5.the updater will detect the player and it will upgrade the firmware.

Aug 06, 2009 | Transcend T.sonic 610 MP3 Player

2 Answers

My transcend Tsonic610 mp3 player is not detected by Windows XP

try to run the latest firmware update and do not formatt your ipod using windows as there is a setting file in your ipod it will cause too much of problem it that is lost

Apr 18, 2009 | Transcend T.sonic 610 MP3 Player

1 Answer

Transcend ipod not detecting properly in computers

The Transcend T.sonic 310 MP3Player is designed to run on windows98SE there are drivers available for windows 98SE at http://www.file-drivers.com/mp3_players/transcend/t_sonic_310.html additionally the utility software works with windows 98SE, Win20, WinXP and WinME. The Utility software must be loaded onto the required PC before installing thedriver. The Transcend website does not provide drivers for other versionsof windows. You did not state wether you have the 512mb or 1gb player but the drivers are no different.You can find full details of the drivers list, software and manuals here for download. please note thatnotall PC's are100% IBM compatible, eg; Tulip, Compaq, olliveti, etc and require device drivers directfrom the manufacturer if they are supported. http://www.transcendusa.com/Support/DLCenter/index.asp?LangNo=0&ItemID=TS1GMP310&axn=SRH1_RLT&DLKeyWd=T.sonic 310
If you are trying to install on another machine with windows98SE and have a driver installation disk and you are trying to install the drivers automatically, I would suggest that you install the device manually through the device wizard, when you get to the part where it asks what device you are installing select 'have disk' then browse to the drive location where the driver files are located and select ok. if this fails to work then the problem is one of incompatability. I hope this helps

Mar 13, 2009 | Transcend T.sonic 310 MP3 Player

1 Answer

Initializing and stopped working

Make sure the hold switch is not enagaged

Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.

Firmware upgrades available from Transcend's own website:
http://www.transcendusa.com/Support/DLCenter/index.asp

Mar 10, 2008 | Transcend T.sonic 610 MP3 Player

1 Answer

TSONIC 610 not getting detected

T.sonic cannot operate after it was formatted in Windows
Formatting T.sonic using the “Quick Format” or “Full Format” option in Windows destroys the
default format of the T.sonic. To retrieve the default format, you must link to
http://www.transcendusa.com/ and download the firmware updates for the T.sonic.

Nov 11, 2007 | Transcend T.sonic 610 MP3 Player

1 Answer