Kenwood tk-370 how do I unlock it - Kenwood KNB-15AM, ,TK260,TK-270,TK-360,TK-370, 7.5v 1700mAh NiMH 2-Way Radio

Check in programming and enable the password. Don't forget the password, write it any where.

Change the EEPROM or contact Kenwood Customer Care, they will send you software by which you can read/write the Radio.

Software TK-2212 is KPG-100 and normal kenwood cable KPG-22 can be used for programming.

Hi,

Manual for Kenwood TK-370, yes please!!!

I don't know wheter you are looking for one or your making one available.

please don't be shy, give as much info as possible, so we aren't guessing.

Cheers,
Peter

You'll need the Kenwood serial cable and software to program this radio. Your best bet would be to contact a Kenwood Customer Service Representative directly. You should have the the radios in front of you when you call so that you can answer questions about them instead of having to call back, etc.

Kenwood contact information can be found here. The TK-260 radio falls under the "Land Mobile & Business" category.

Please rate this reply if helpful - good luck!

Iam looking for free programming software download for ip-pabx sv8100

One of the keys has been programmed as the lock button. you will have to experiment by holding each button for a couple of seconds until you hear a tone that tells you the radio is unlocked.
On the one I have for our fire and rescue it is the < button but it could be any of the four on the front or the two on the side below the talk button.

I referred the problem to a retail outlet. All fixed. Don

the manual from the manufacturer is pretty much useless. every time i wanted to do something with mine all the manual said was "see a sales rep or dealer!" i have the software (windows version) that has a pretty good help file in it. you may want to check out the yahoo boards for kenwood.

http://safemanuals.com/ pleace rate me let me know if this helped.