Question about Acer AL2016 W 20" TFT LCD Monitor

Open Question

When playing Maplestory and Halo C.E.: screen says "NO INPUT SUPPORT"

I know that this problem has to do with the screen and not the game or computer, because i used another screen with my computer and it works. I have already tested other possible resolutions, and it still didn't work. I have updated my graphics card driver and it still didn't work.

Posted by jacob liu on

  • jonaboy268 Dec 27, 2008

    what kind of monitor do you used to fix input not support on maple story????????????????(old, LCD , OR some other kind)



×

Ad

5 Related Answers

Anonymous

  • 432 Answers

SOURCE: Input Not Supported?

Try changing the resolution in the game. If that doesn't work change the resolution in 'Control Panel' under 'Display'

Posted on Jun 28, 2007

Ad

Anonymous

  • 1 Answer

SOURCE: al1917w lcd monitor resolution problem

Get a new video card, you dont need the best video card to support 1440*900. It is affordable and the best solution.

Posted on Sep 10, 2007

Ad

Anonymous

  • 1073 Answers

SOURCE: Computer won't recognize monitor driver

Its the usb, if u connect the monitor via the standard port, the vga port, it will work. If your monitor only have an dvi cable you can fix that by an adapter. That adapter should be an DVI to VGA.

Good luck to you

Posted on Dec 11, 2008

joegoldman

Joe Goldman

  • 337 Answers

SOURCE: Acer X193w-- input not supported..

Hello,

This is likely a screen resolution issue.

That monitor has a native resolution of 1440x900 (I used to have one). If the game is feeding the monitor too high a resolution, the monitor can't display it and.....input not supported. So, if the game has a configuration option (without going into the game itself) set the resolution to 800x600 and try to play. If it works, bump up the resolution until it looks acceptable.

Hope this helps!

Posted on Aug 21, 2009

budmrtn

Bud Martin

  • 11361 Answers

SOURCE: I get an input not supported error showing up on

Did you set the PC video out to the native resolution of this ACER? 1400 X 1050 60Hz.
http://www.xbitlabs.com/articles/monitors/display/20-21inch-2_2.html
You will get the unsupported message if it cannot handle the resolution you are trying to display.

Posted on Jan 25, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Is there a difference between halo 3 and halo 3 ODST ?

If you actually purchased only the ODST game you will not be able to play anybody in Halo 3 online. You will still actually need the Halo 3 disc to play multiplayer online.
0helpful
2answers

Why won't it let me play?

Maybe your computers not the right teyp
0helpful
1answer

Cant play campaign

Halo 3 is buggy disk , I have 2 brand new copys of halo 3 for testing repaired drives
and found that of all the 360 I repair, benq drives will read 99% of the time the hitachi
seem too slow on the seek time to get a
lock/read resulting in a dirty disk error.

Halo 3 does not play on all 360
its just a picky disk .There seem to
be two xboxs thoes that will load halo 3
and thoes that will not.

Sorry this may not be very helpful

Rob
1helpful
1answer

Acer X193w-- input not supported..

Hello,

This is likely a screen resolution issue.

That monitor has a native resolution of 1440x900 (I used to have one). If the game is feeding the monitor too high a resolution, the monitor can't display it and.....input not supported. So, if the game has a configuration option (without going into the game itself) set the resolution to 800x600 and try to play. If it works, bump up the resolution until it looks acceptable.

Hope this helps!
1helpful
1answer

Halo 3 Matchmaking not working... for me

first check your fire wall settings on your comp, then make sure its just halo, if its just halo then it could be the disc.
0helpful
1answer

Problem with computer shut down when using Maplestory & other P2P games

Hi,

try to uninstall all security softwares and just install the most reliable one. That should fix your problem.

Hope this helps.

Thanks,

Karlox™
1helpful
4answers

XBOX 360 no video with sound after playing HALO 3

this sounds like the e74 error ,these dots will make the screen fuzzy like cod 4 and 5 its the video chip thats near the av cable slot need service and can result to one ring of death aka e74 error.
0helpful
1answer

Graphics problem on Xbox 360

I think this is less of an isolated issue but a universal one. As Halo 2 (and I'm assuming the version of Medal of Honour you speak of) are original xbox games, these can be prone to graphics distortion due to being emulated. I often find my Halo 2 campaign mode sometimes "ghosts" or leaves certain outlines stuck on the screen, which is irritating but nothing too major. If this happens in any designated xbox 360 game, search the web for similar problems with the game itself, if not give Microsoft a call. Bring food, it's a long call wait :)
Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

329 views

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Ekse

Level 3 Expert

13435 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1190 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...