Toshiba 35A44 35" TV Logo

Related Topics:

Question about Toshiba 35A44 35" TV

1 Answer

Toshiba 32" 2-Tuner PIP TV - Loud pop - then static

I saw a similar posting, in this forum, but my TV is different and I'm not sure it is the same thing. When I turn my television AND digital cable on, after several minutes there will be a loud static POP, and then the picture goes all snowy and warbly. When the problem originally started, this would only happen once, and the picture was not affected. Now though, it will be indiscernable video for a few minutes (it is getting worse). The other night, I turned on the television and switched to the Video 2 input to play a movie. This problem did not occur. I also tried the Video 1 input and played a game on my GameCube for a while, no POP or video distortion. So I'm trying to figure out if this is my TV, or if somehow it's the cable service? Or the literal cable from the wall? Or a power surge? I have no idea. Help, please! I love my TV and I don't want it to die! =)

Posted by amy mainer on

Ad

1 Answer

Henry Thomas

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,074 Answers

HI greetings from Belize.from the explanation i believe that there is two thing you might be having a problem in your tunner section whereby the tunner is going bad or the tunner circuit . or the cable from your wall is not connected corectly might lose.the video 1 and two is not associated with the tunner some how thats is the reason you did not get any disturbance.if your cable connection is good.then have your set checked out by a tech.good luck.

Posted on Mar 23, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a problem that appears to be related only to my coaxial cable input. I periodically get static, white lines across the screen or a "no signal" error message. Pixilation does not occur. Initially it...

Hi

I think your problem is in the tuner, a metal box located near the antenna input. This tuner can be removed and serviced. Sometimes the tuner DC supply line is unstable due to a filter capacitor or zener diode generally rated 33V (most common) and should be the first step in troubleshooting process.

Sully

Sully
0helpful
1answer

Static & Picture Loss via Coaxial Cable Input Only on Sony FD Trinitron WEGA XV-36XBR450

Hi
The problem may be in the tuner or associated circuit. Firt check the DC supply line to the tuner. This circuit has a limiting resistor (15K 3W) and a 33V zener diode. If these are OK the tuner is faulty and should be removed (sometimes it comes on a separated board attached to the main board) and serviced.

Sully
1helpful
1answer

I have a Samsung 46 LCD, model LN46A550P3F, that about six months ago had the well known problem of cycling off and on, with the clicking noise, and making occasional LOUD static noises with a distorted...

Power supply board u fixed before was good,but the tv main Tuner signal board it was working on it last leg.Distorted picture screen loud static noises are the indications of the tv main Tuner signal board are not regulating signals of all of those ICS output on the tv main Tuner signal board it is dying and now it is dead.Don't change the T-CON bord it is good.Tries Shopjimmy.com,Ebay.com to buy a whole refurbish tv main Tuner signal board for the replacement.
0helpful
1answer

There is audio but no video in pip

hi! have you checked the sub-tuner. in most cases sub-tuner fails causing to loose pip. try to replace your sub-tuner.
2helpful
1answer

How do i hookup my pip on this tv

Just saw your post, I am not sure if anyone helped you out.
Here is a good link to ehow.
http://www.ehow.com/how_2112647_pictureinpicture-tv-work.html

I appreciate your feedback.
asnowman
0helpful
1answer

Static on all cable channels

The tuner is questionable The problem lies inside the isolation box. Ask a repairman to open this isolation box and resolder the small board. There are two small resistors that need resoldered. This also has the rf connector on it. And you may have him resolder the tuner if this does not fix it. Have him inspect any and all grounds on the main board as well. Good Luck
1helpful
1answer

Toshiba 50HP66 Blank Screen with sound

I would suggest to read what other members have reported by clicking here.
Good Luck.
0helpful
1answer

RCA D61W130 tv

this unit has two tuner modules. one is the main tuner and the other is the slave or the pip tuner. it would apear from your description that the main tuner has failed. it is possible that this can be replaced.
0helpful
3answers

PIP

Let me know what you find out, I have a similar problem. I can get the PIP screen to come up but it will not allow me to have it on an input that actually shows a picture - just blue screen.

[email protected]
0helpful
1answer

Toshiba cf35f50

Bad connections in tuner. If your really careful, lots of very small parts, you can resolder the cracked solder ground connections to the metal box and metal shields.
Not finding what you are looking for?

98 views

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76843 Answers

Cindy Wells

Level 3 Expert

6478 Answers

Ekse

Level 3 Expert

13435 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...