Question about Childesigns Carrollton Crib
I think i have this crib i know it is by childesigns but it also has a sticker on bottom that says generation2worldwide but anyway my 7 1/2 month old child is starting to stand up in this crib and he can fall out because the matress is not low enough. I was wondering how low this crib can be lowered or anything to get the mattress lower.
I think you are looking for metal brackets that attach to the mattress support made of wood.
Generation 2 went out of business and they are almost impossible to find parts for. Feel free to email a picture of you mattress support to [email protected] and we will see if
we have a set. Visit us at http://www.other-mothers.com
Posted on Feb 02, 2008
Basset cribs require removing four 3/8 inch bolts from each corner post. These bolts connect the matress support to the posts via a 4 inch steel bar. There are three levels of adjustment. Remove the matress, back out the bolts, decide what level fits your needs and raise or lower accordingly.
Posted on Jan 12, 2008
This mattress on this one can be lowered by taking the mattress out and lowering the springs to the bottom set of holes. Need tools. Not hard to do.
Posted on Jun 23, 2007
I am not familiar with this crib, but I have been through many cribs and they all (so far) are adjustable to lower the mattress. You can figure it out by removing the mattress and matress board and inspecting the way the board is connected to the frame. Often there is a bar or rung that sits in a clip or groove at each corner of the crib just below the matress board. You may have to crawl underneath and look up at it. Usually you will be able to lower the platform without using tools, but be sure to take the weight off the platform by removing the mattress and board. Good luck.
Posted on Nov 14, 2006
i have located a manual off the internet someone scaned to me. i dont know if it is exactly the right crib. the one that was given to me looks like a carlton or shelby design. i need the screws for it and the size was on there along with the instructions,the screws fit great. i can send it to you if you still need it just email me at [email protected]
Posted on Aug 19, 2007
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: