Instruction manual i need a instruction manual for a ge microwave jvm1450ba001

images for ge microwave oven wiring

GE Appliances - Appliance Owner's manuals, installation ...

www.geappliances.com/ge/service-and-support/literature.htm

GE Appliances' owner's manuals page offers specific use and care guides and installation instructions on GE Appliances as well as Quick Specs and Energy ...

[PDF]Owner's Manual - GE Appliances

products.geappliances.com/MarketingObjectRetrieval/Dispatcher?...

ge.com. IMPORTANT SAFETY INSTRUCTIONS. Use this appliance only for its intended purpose as described in this Owner's Manual. ? This microwave oven ...

Free GE Microwave Oven User Manuals ' ManualsOnline.com

Your owner's manual will tell if that's an option.

If for some reason you don't still have yours, you can download GE owner's manuals and installation instructions here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Even though the model has been discontinued, the tray is still available. If you go to www.appliancepartspros.com and enter the model number you should be able to find the tray there. Hope this helps you.

You can download manuals directly from GE. The installation instructions are here, and here is the owner's manual if you need that as well.

You can download GE owner's manuals and installation instructions here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

You can find helpful exploded view diagrams and order parts by entering your full model number here.

Or you can enter the original part number WB39X10003.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Ok, the part number is below but, i would advise to check the Magnetron thermal cut-off(Magnetron thermal fuse). This fuse could have blown.

MAGNETRON ASSY General Electric Part Number: WB27X10017

GE Customer Service can help you with that inquiry and they are at http://www.geappliances.com/service_and_support/contact/

We're happy to help and we appreciate your thoughtful rating of our answer.

The part number for the Control Panel assmbly is WB07X10789, you can order it from numerous places but www.repairclinc.com has it listed as a special order for 110.00. To replace it first shut for the POWER. there are usually 2 screws in the face of the grill above the door, sometimes in the top of the unit. Remove these then the grill will pull off, just above the control panel there is one screw take that out then lift up on the control and pull out on the top, control panel should come out. Be sure you keep track of the wires attached to the control and where to put them back....
Then you will need to separate the control board from the control panel . After that reverse to reassmble

We have *critical* safety, disassembly, and troubleshooting info at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk

Essentially you unplug the oven from the wall outlet, and remove the control panel assembly as per the instructions at the site linked above.

There should also be a very helpful "mini-manual" hidden inside the unit behind the control panel. It's very helpful when troubleshooting.

Then unplug the keypad from the circuit board, heat up the keypad from the front with a hair dryer, then peel the old keypad off. You have to make sure all the old adhesive is off.

Then peel the backing paper from the new keypad and carefully press the new keypad in place. You need to be precise - you cannot apply it, peel it off, then reapply it.

If you would like to have us do this for you, we do that for $39.95 plus part costs.

You can usually find helpful exploded view diagrams and order parts by entering your full model number here: http://tinyurl.com/gv383

We're happy to help and we appreciate your thoughtful rating of our answer.