Question about D-Link DES 3226 (DES-3226) 24x10/100 Mbps Networking Switch

6 Answers

Lost login Username and Password

I've got a Switch D-Link DES 3226, I've lost Username and Password for login to configure the device. There is not reset button on the Switch, so I can't do anything to resolve the problem. How do I recover or factory reset it?. Give me solutions, thank you!.

Posted by Tuyen Pham Luu on

  • Prabhu_mv Mar 18, 2008

    I've got a Switch D-Link DES 3226, I've lost Username and Password for login to configure the device. There is no reset button anywhere on the Switch, so I can't do anything to resolve the problem. How do I recover or factory reset it?. Give me solutions, thank you!.

  • Rafeeq Ahmed
    Rafeeq Ahmed Jun 27, 2008

    yes i am also so some problem plz told what is the solution

×

Ad

6 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

How do I use the reset the password on my DES-3226?

Posted on Mar 02, 2008

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

I you lost your password contact D-link technical support and have your serial Number and MAC address and they could generate a Backdoor password for you.

Posted on Mar 03, 2009

Ad

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 624 Answers

Facing the front of the switch, the Reset pin hole will be to the very right. Insert a paperclip into the hole, press and hold the Reset button for 10 seconds. The device should now be at factory defaults.

Posted on Jan 01, 2007

  • Anonymous Jan 16, 2007

    My previous post was based on the *L* version, the only info I could find on the US site. And no I haven?t physically seen one until today since I use HP switches pretty exclusively. At any rate I did some more searching and found an overseas D-link site by accident. It didn?t have a manual but it did have a PowerPoint presentation on how to reset the switch without the web interface. Apparently the *L* version added a physical reset switch to avoid having to use the console, after you use it you?ll understand why. HP switches have a console connection as well; the problem with them is getting a program called HyperTerminal to work with the equipment.

    Please note you need to connect the switch to a PC serial port using a cable that originally came with the switch. It looks like a standard serial cable with a DB 9 connector each end, probably with D-link molded into the connectors or on a label. Here are the instructions pulled from the presentation:

    -Start the Hyper Terminal program (Windows XP: Start, programs, accessories, communications).
    -Key in the [Username] and [Password, the default is no username and password.
    -Select the [Reboot] option
    -Select the [Reboot & Load Factory Default Configuration] option.
    -Select the [Yes] option.
    -You should see a counter running (on the left hand side).
    -You should see a message on ?the switch is rebooting? (on the right hand side).
    -You should see the above screen while the Switch reboot.
    -When the reset is done you will be back to the [Username] & [Password] screen.

×

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have lost my HP KVM 16 port possword and no hyper terminal communicate so how can i access KVM possword

Posted on Jan 25, 2009

Anonymous

Not sure if you have seen a des 3226, but no pinhole on it! Still trying to find one.

Posted on Jan 16, 2007

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I've got a Switch D-Link DES 3226, I've lost Username and Password for login to configure the device. There is not reset button on the Switch, so I can't do anything to resolve the problem. How do I recover or factory reset it?. Give me solutions, thank you!. my mail id is santosh[email protected]

Posted on Feb 07, 2008

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do i reset to factory default settings if i lost password

Hi,
This router will have a Reset button in back side of router.
Press that button for 30 Seconds. It will go back to factory default setting.


Thanks for using FixYa.
0helpful
1answer

I wanna password reset my D-link 3624i switch...can anyone help?

Recovering a Lost Password - If the password for the router configuration is lost then the
following procedure can be used to set it to "friend".
1) Power cycle the router
2) Hold down the "s" key during startup. (The router will startup with the
current release but no configuration
3) Edit the configuration file and remove the line (Ctrl Y):
set user=manager pass=3af00c6cad11f7ab5db4467b66ce503eff priv=manager
4) Save the router configuration
5) "restart reboot"
5helpful
1answer
0helpful
1answer

Ho to reset dlink3226 switch

Have you got a manual for the D-Link switch?
You may find the info in the manual, if you have lost the manual you can download a manual from this WEB site - Use this link :-
http://safemanuals.com/annexe_Reference%20Guide_D-LINK_DES-3226-_E.htm
0helpful
1answer

My problem is under i not known as my switch ip and why i configuration to my switch

switch dont have any ip. this is a midetor for shairing data between more than one computer connect your computers to switch by cables and configure ip to your computers
2helpful
1answer

Switch D-Link DES3226 Lost Username and Password

Manufacturer can reset that with the mac add. and S/N. if it hasn't been set try leaving username blank and enter admin for the password
2helpful
2answers

Reset problem

This device only a switch and there's really no reset button for this and there's also no configuration on this device its just a passthrough of internet access if you have a router that's the one that you can reset and also your modem..

Hope that helps.........
0helpful
1answer

ASM200 tenor password

The only way is to send to D-Link support your equipment's serial number and MAC address, and they will generate a master password.

you can view the manual for more information

http://203.126.164.140/products/view.asp?productid=DES%2D3226SM
0helpful
1answer

Configurtion

Hi prasad, Here you go: ftp://ftp.dlink.com/Switch/des3226/Manual/DES-3226_MIB_manual_170.zip All support info and downloads for that switch can be found here: http://support.dlink.com/products/view.asp?productid=DES%2D3226# Hope that was fast enough for you!!! Good Luck, El Duderino
Not finding what you are looking for?
D-Link DES 3226 (DES-3226) 24x10/100 Mbps Networking Switch Logo

5,157 views

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2278 Answers

Ekse

Level 3 Expert

13435 Answers

Mike

Level 3 Expert

4379 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...