I have a new phone. When I turn it on I get a long error message that says:
"BOOT LOADER" and a bunch of numbers.
Then it says
"P H SIG ERR: 35:02:
OK TO PROGRAM CONNECT USB DATA CABLE"
At first it did this only every now and then. Now it does it repeatedly and you have to turn it on and off several times before it does the regular start up. As long as you leave on it works fine.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If that doesn't help solve the issue, you might have a corrupt boot loader on your phone and you will need to take it in to your carrier's store / kiosk to get it replaced.
Well you can unlock your phone but you have to boot in the loader first and let me know the spl version. How to do that is you turn off the phone and turn back on while pressing the volume key down and it will boot you to the loader screen. On the loader screen can please let me know if you spl number is 1.42xxx.
probably you had pressed the bootloader buttons. once the phone is diplaying a status message like you are having, it means that the phone is ready to be flashed. if you haven't do anything to your phone after displaying the message, try to remove the battery and put it back on. but if you had this status message during flashing, it will give you the same issue even if you remove the battery.
I Charged the battery up using another motorola phone,and then I did a software upgrade, and this has fixed the problem.The phone is working great now,all photos or videos were saved.
What i think caused this error is that the phone was doing an upgrade and then I got a message at the same time,I think these clashed some how and prevented the upgrade from completing,hense causing an error on the boot loader.
hold * and # and Power On when the phone is off..do this two times if first time not solves the problem. If you still have the problem it means the soft is broken and must be implemented again
At you the program has flied, the software loader therefore is loaded. You should program phone again. Programs are for this purpose necessary the driver, cable USB. Or give to repair. http://heaters.agilityhoster.com/
my moto v3i just stopped turning on. everytime i press the power button,
the keypads just lights for about 1 second ands then turn off again.
i tried to use the combination key,
POWER BUTTON (+) * (+) # and then the screen displays the BOOT LOADER thing so i thought this phone might be ok
×